The Canadian Space Agency (CSA), which invented and made the International Space Station's 30-year robotic Canadarm project, is working on lunar and Mars robot rovers. It recently unveiled five rover prototypes and put them through their paces on the agency's testing terrain, which simulates the surfaces of Mars and the moon.
The new lineup includes four lunar rovers -- the Micro-Rover Platform with Tooling Arm, the Kapvik Micro-Rover, the Artemis, and the Lunar Exploration Light Rover -- and the Mars Exploration Science Rover. They are in addition to the Juno and Rex rovers, which have been operating since 2010.
The CSA also developed some spinoff technologies resulting from its rover development work. They include the SL-Commander automated electric all-terrain vehicle, a fuel cell, and the Q6 mini-computer.
Click on the image below to check them out.
The CSA's Rex rover has a robotic arm that simulates collecting Martian rock and soil samples. It travels at 4cm/sec (1.57inch/sec). On its six aluminum or rubber wheels, the rover can navigate over obstacles up to 15cm (5.9 inches) high and climb slopes of up to 10 degrees. Rex weighs 140kg (308.64 pounds) and measures 152 x 142 x 76cm (59.84 x 55.9 x 29.92 inches). It can carry up to 30kg (66.13 pounds) of science payloads. In 2010, the CSA jointly field tested the rover with NASA at the Flagstaff Meteor Crater in Arizona. (Source: Canadian Space Agency)
It's worth recalling that the CSA's budget is around $300 million a year, about 1/60th of NASA's budget of about $18 billion. And it seems to me that this project was done with at least one eye on terrestrial applications -- specifically, to help BRP (and other Canadian companies, presumably) to develop better consumer products, with the SL Commander being Exhibit A.
(By the way, that's why the SL Commander has a windshield; as the caption to the slide points out, it's based on work that BRP did for the Lunar Light Exploration Rover, but it's intended for use on Earth).
Since the CSA is part of Industry Canada, it makes sense for them to be promoting Canadian businesses. That's what Industry Canada is supposed to do, after all. Imagine if NASA were part of the Department of Commerce.
While the CSA may be small, Canada has a larger space presence through a number of its private companies, including McDonald Dettwiler, mentioned in the article, which recently acquired SpaceSystems/Loral. This model (a significant private sector presence, coupled with a smaller public sector, focused mainly on helping the private sector) seems to be one that some people would like to see the U.S. space program emulate.
(Oh, yeah, @Ann, or whoever picked the title for this article: great pop-culture reference).
Nice to see that the CSA has other projects besides the arm that they are known for. This is quite a variety of concepts. I'm assuming they are platforms to test different instruments/approaches/missions rather than a "family" of rovers geared toward a specific mission.
When has a prototype ever been a viable product, ready for production/use? I think what's shown here is a good first step as we think about space colonization.
Ervin. Have to agree with you on this one. I think the mechanical drive concepts are OK and fairly well thought out but lift off and re-entry are definitely tough on components and other equipment. I worked in the aerospace industry (Titan II Missile) some years ago and "survival" was the key word. Generally, mission critical components and systems had redundancy. It was amazing to me how many launches were successful due to the redundant systems after the primary systems failed. I definitely enjoyed Ann's post and it's very interesting to see what's in the works relative to probes that might be used.
Ann--Excellent post. Do you know if there is available information that would tell us what "on-board" diagnostic packages exist to analyze soil, air for methane, test for water, etc etc? Is there a "standard" schedule of experiments given for probes of this type; i.e. lunar, Mars, etc? I have taken a look at the NASA web site and don't see any specifics. (Maybe missed them.) This would be very interesting to know. Again, excellent post.
I looked critically at the critical note about figure number ten. It states the rugged processor box wouldn't last a minute in space, from "one who knows" But the legend states the box is space rated by NASA, ESA and Nippon SA. Who is kidding whom?
No offense to anyone but half the stuff I see in here are not going to survive space a minute in. especially that "ruggedized computer" in image ten. I can see holes the size of quarters on it that are not sealed in any way. Take it from some one that has worked on materials that actually go to space pin size cracks that require a 10X magnifying glass to see are a problem if your insulation material is not sufficient. One more thing, those connectors just don't look space worthy. Really Ethernet? Custom sealed connectors rated for space might do the trick. Generally speaking off the shelf connectors that are rated for that environment will be cheaper than to design your own too so good rule of thumb don't try this at home.
Lou, no decisions have yet been made on what will be deployed where. These are prototypes, so the CSA is still working out the details and trying out different approaches to similar goals.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New disc magnet motors fit into the design trend of stepping up to closed loop performance while maintaining the cost advantage of stepper motor technology.
At the Design News webinar on June 27, learn all about aluminum extrusion: designing the right shape so it costs the least, is simplest to manufacture, and best fits the application's structural requirements.
A new battery design, which replaces lithium with abundant and low-cost elemental sulfur, is still in its nascent stages but shows real promise for giving batteries more energy potential.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
2 
