In 20 years, what will the typical work day be like? That is the question the Working Worlds in 2030 project is trying to answer.
Architecture and design students at the Universities of Darmstadt and Detmold have been working on solutions for the working world of the future, and their concepts, based in part on products from Bayer MaterialScience, were presented by future_bizz at Orgatec in Cologne. Their creative approaches are based on scenarios that employees will face in the future: Working conditions, performance requirements, and responsibilities of employees.
Future_bizz recently presented creative solutions for tomorrow´s working world. (Source: Bayer MaterialScience)
The students were given fictitious descriptions of typical employees during a typical work day in the future. This allowed students to combine the factual information about the working world of 2030 with emotional aspects.
“Their concepts therefore reflect more accurately the daily work of the protagonists, their culture, and individuality,” said Dr. Lorenz Kramer, innovation manager in the new business unit at Bayer MaterialScience, in a press release.
An example concept is the "AdPack," which is a backpack that works as a mobile office by turning into a chair or lounger. A large, folding touchscreen, that can open over the user's head, is also integrated into the backpack. To manufacture the AdPack, polymer products, including rollable OLED films, could be used.
If privacy is something you need during the workday, you could opt for the Private Device option, which forms a closed tent with wings. This could be made with electroactive, switchable polycarbonate films, and would allow the worker to be completely secluded and have a quiet area to work in.
The "Sky Hangar" is another concept for use as a temporary workspace. The modular office container system is flexible, designed for sustainable assembly and disassembly for many different work situations. Once you use it for one work project and take it down, it can be reconfigured and transported to the next location. Materials recommended for this include polycarbonate for lightweight glazing, and lightweight, rigid PU foam composite systems for temperature insulation.
Some other questions asked were: How will IT devices influence the working environment in the future? How will the trend towards virtualization change offices and work tools? What will the workplace be like for people who primarily work in networks or projects?
What are some of your ideas and solutions to the proposed questions for the working day in 2030? Tell us in the comments section below.
Excellent article Lauren. I look at how my work day has changed over the past 40 years and, of course, the greatest change by far has been the advent and usage of computer science. I can now add to that the usage of "smart phones". Here is a very brief list of what I feel our typical work day would look like in 20 or 30 years.
1.) Due to significant mobility of PCs and communication devices, I feel there will be a "blending" of office and home. No longer will be locked into strict facilities due to the necessity of communication. The will mean a typical 40, 50 or 60 hour work week will morph into being on call 24 hours per day--if we agree to put up with that. Now, one exception will be support of manufacturing facilities. Being on the factory floor is a definite necessity so engineers and engineering managers will still need to be available.
2.) There will continue to be decreasing privacy. The only remaining privacy relative to the work force will be the thought never spoken or written.
3.) Globalization will be a must for survival necessitating multiple facilities and engineering support for those facilities. Everyone in the engineering profession--at a certain level, will need and use a passport.
4.) Devices to translate languages other than English will make understanding almost instantaneous between remote locations. (This is coming faster than we think.)
5.) Everything will be in the "cloud-based" arena.
6.) Wireless will dominate all communication and IT devices including the factory floor.
OK--that's about it. We are headed into a "Brave New World".
Yes it is a waste of fuel, Chuck. It's also lost production time. The average American commute is an hour per day. That's about 20 hours per month of lost time.
I predict that we will eventually rebel against the environment we have steadily been creating where we communicate through email even in the same building rather than walk across the hall - the workplace will become so socially inept in face to face conversations that it will reach a breaking point and we will have to return to actually speaking in person to each other...people will have to relearn body language which is said to be over 65% of communication. We will actual enjoy having real conversations and productivity will increase because there will be fewer misunderstandings...I can dream, can't I?
@Charles Murray: ... or when companies will start providing more incentives to their employees to use public transportation. When I lived in Chicago, I didn't own a car; there was no need. Would you rather sit in traffic on the Dan Ryan, or breeze past on the Red Line? Even now that I live in Waukegan (40 miles north of Chicago), I still usually take public transportation when going into the city. Not only is driving to and from downtown Chicago during rush hour an incredible waste of fuel, it's a waste of time. Chicago has excellent public transportation, something other cities should emulate.
Ann, I remember a factory where I worked while I was in college in the early 1970s. The management took it upon themselves to shorten the work week. They wanted to move from five eight-hour days to four ten-hour days. Fridays were supposed to be days off. After a short time, though, the work week turned back into five days. Monday through Thursday was ten hours and Friday turned into an eight-hour day, instead of a day off. Eventually, they ended up cutting some of the employees because they found that they didn't need as many people with everyone working a 48-hour week. Somehow, the grand ideas about the workplace of the future seldom turn out to be so grand.
Rob: Every time I see the massive traffic jams going to and from downtown Chicago, I wonder when the edict will come down to companies to have more of their employees work at home. It's an incredible waste of fuel.
Comparing my workplace now with 20 years ago, I think the biggest difference is the increase in the number of handicaps that restrict us. 20 years ago I could solder with lead, my PSU's could put out more EMI and no-one noticed, I could say good morning to a female co-worker without being accused of sexual harrasment, and there were less stuffed suits in the EU looking for more substances to ban and tweaking the compliance standards. in 20 years I'll probably have access to more information than I can handle, and I'll still be commenting on Design News in my lesuire time, not my work hours.
I also heard all those predictions about more leisure time. Then in the 1980s, as one of the first people I knew with a home office, I heard predictions about everyone working from home. It has not happened in the volumes predicted, no matter how portable our jobs can be. If it had, there'd be a big rush to the suburbs, instead of to the cities.
As energy efficiency becomes more and more a concern for makers of electronics devices, researchers are coming up with new ways to harvest energy from sound vibration, footsteps, and even electromagnetic fields in the air.
The government wants to study your brain, and DARPA wants to use similar information to give robots true autonomy beyond any artificial intelligence developed to date. Sound like science fiction? It's not.
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
1 
