In a recent blog I wrote on the growth of service robots http://www.designnews.com/author.asp?section_id=1386&doc_id=257119 a commenter asked about the difference between professional and personal service robots. The robots in Cabe's article here are a good example of personal service robots based on a design platform very similar to some professional service robots: the medical telepresence robots used increasingly in hospitals, which DN's Elizabeth Montalbano wrote about here: http://www.designnews.com/document.asp?doc_id=249227
Battar, you are so right. On the other hand, right now my wife is the one who works late. Frankly my sons appreciate the situation.
I am not sure of the actual utility of these robots at work. If your job requires constant interaction with a group of people then this may not be the way to go. You should probably be there.
Well, these robots are certainly pretty cool and give telecommuting a whole new meaning. But like some of the other comments made, I also am not sure how useful they would be unless someone's actual physical presence was really required at work. In my experience, the joy of telecommuting is that people don't necessarily get to see you while you're working at home--it sort of defeats the whole "working in your PJs" mystique (guilty as charged!). The technology itself is interesting, though, and certainly could have its valid applications.
I see these bots as more of a novelty in most cases. People who need to interact with co-workers and have to be mobile would benefit. But I think the tech concept really shines in the situation with Devon, the sick child who attends school with it. It's the best alternative to being there.
I remember when telepresence was a wheeled in tube television and a stationary camera. It's about time this exists. I just hope the price comes down in the near future. Affordable high-end tech spurs innovation. Look at the smartphone's tech bloom.
Definitely a novelty at this point in time. In order for systems like this to more into the mainstream, obviously cost is an issue, but there is also a need to target the necessary set of features that would draw a larger following (especially if the cost is still high). Very interesting concept.
I telecommute 100% of the time. On occasion I must deal with unruly coworkers. So my question is: will there be a robot available that will let me roll up to a coworker in the office and slap them upside the head to get their attention or announce my displeasure? That would be progress indeed.
Great report, Cabe. I've wondered for some time when some corporate accountants will start to decide that it's cheaper to keep employees at home because it reduces the size and overhead costs of centralized facilities. If that happens, then telepresence robots seem like the next logical step.
You can still be in your pajamas, you just need to dress from the shoulders up! Remember to blank the screen when you walk away for a cup of coffee.
I have a distant commute, but as a plant engineer often have to 'run down to the shop' to see what's what, or measure things. Someday they'll be able to not only picture, but create 3D models depending on what they see. Although I'll always have to be there some, I could see this reducing my need to be there in person in the future.
Was interesting to see the 'bot in a school setting. I wonder, was that the teacher, or a student? The end of classrooms is already on it's way, especially at high level institutions, no mobility required.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New disc magnet motors fit into the design trend of stepping up to closed loop performance while maintaining the cost advantage of stepper motor technology.
At the Design News webinar on June 27, learn all about aluminum extrusion: designing the right shape so it costs the least, is simplest to manufacture, and best fits the application's structural requirements.
A new battery design, which replaces lithium with abundant and low-cost elemental sulfur, is still in its nascent stages but shows real promise for giving batteries more energy potential.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
2 
