A slightly different scenario, but I recall a technician sorting 10% resistors, trying to find a handful that were exactly the correct value. He went through an entire bag and couldn't find any closer than 5%. So much for Gaussian distribution. Of course the reason was that all of the closer value resistors were already removed from the sample by the manufacturer to be sold as 5% resistors.
There are other real-world factors that this analysis ignores. One is calibration accuracy, another is calibration drift. A typical calibration cycle is annually. The day after an instrument is calibrated, the uncertainty can increase because of component aging, ambient temperature effects, etc. Reality always makes uncertainty increase, often well beyond the simplistic approach of resolution; it's close to the concept of entropy. Resolution puts a LOWER BOUND on uncertainty, but no upper one! That is the worst part of digital instrumentation, in that it misleads the user to trust the results far beyond what is merited.
Great article Jon - it is important to understand uncertainty in measurements so that you can understand whether or not a reading is really within tolerance. Understanding the tolerance that is acceptable (range of acceptable readings due to measurement uncertainty not only of test equipment but also the device under test) are both important to understand. Repeatability and reproducibility are also factors. Gage R & R is an important tool in this area. Uncertainty is also another reason to make sure your measurement equipment is in calibration. Thanks for the link to the Evaluation of Measurement Data: Guide to the Expression of Uncertainty in Measurement - it is an excellent resource.
Some humanoid walking robots are also good at running, balancing, and coordinated movements in group settings. Several of our sports robots have won regional or worldwide acclaim in the RoboCup soccer World Cup, or FIRST Robotics competitions. Others include the world's first hockey-playing robot and a trash-talking Scrabble player.
A recent example of a major CAE revamp is MSC Apex, released last month by MSC Software Corp. In a discussion with Design News, MSC executives noted that its next-generation platform is designed to substantially reduce CAE modeling and process time, “in some cases from weeks down to hours.”
The Thames Deckway would run for eight miles close to the river’s edge, rising and falling slightly with the tidal cycle. It will generate its own energy from a series of devices that will line the pathway and use a combination of sources to make the path self-sustaining.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.