HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Blogs
Blog
Slideshow: Flying Robots Take Action
6/12/2013

Image 1 of 11      Next >

The Nano Air Vehicle, a DARPA-funded hummingbird-like demonstrator robot made by AeroVironment, flaps its wings to fly in any direction. The remote-controlled Nano can hover with precision like the real bird, and it can fly clockwise and counterclockwise. It weighs 19gm (0.67oz), including batteries, video camera, motors, and communications systems, and it has a wingspan of 16cm (6.3 inches). Its size and weight are within the range of real hummingbirds, and, like them, it uses its wings for control and propulsion. The Nano can hover continuously on its own power source for eight minutes. It can shift from hovering to a forward flight speed of 17.7kph (11mph). While hovering, the Nano can tolerate side wind gusts of up to 8kph (5mph)without losing more than 1m (3.28 feet) of altitude.(Source: AeroVironment)
The Nano Air Vehicle, a DARPA-funded hummingbird-like demonstrator robot made by AeroVironment, flaps its wings to fly in any direction. The remote-controlled Nano can hover with precision like the real bird, and it can fly clockwise and counterclockwise. It weighs 19gm (0.67oz), including batteries, video camera, motors, and communications systems, and it has a wingspan of 16cm (6.3 inches). Its size and weight are within the range of real hummingbirds, and, like them, it uses its wings for control and propulsion. The Nano can hover continuously on its own power source for eight minutes. It can shift from hovering to a forward flight speed of 17.7kph (11mph). While hovering, the Nano can tolerate side wind gusts of up to 8kph (5mph)
without losing more than 1m (3.28 feet) of altitude.
(Source: AeroVironment)

Image 1 of 11      Next >

Return to Article

View Comments: Newest First|Oldest First|Threaded View
Page 1/5  >  >>
Ann R. Thryft
User Rank
Blogger
Re: Flying Robots
Ann R. Thryft   6/28/2013 11:54:28 AM
NO RATINGS
Cabe, thanks! I don't know if this is the one Deberah was thinking of, but I can use it for future slideshows. It does look a bit like a flying fish.

Cabe Atwell
User Rank
Blogger
Re: Flying Robots
Cabe Atwell   6/27/2013 11:08:04 PM
NO RATINGS
I think this is what you may looking for and it's simply called the 'jumpglider' from Stanford University:

http://bdml.stanford.edu/uploads/Main/PerchingPublications/Jumpgliding.pdf

 

C

Ann R. Thryft
User Rank
Blogger
Re: Flying Robots
Ann R. Thryft   6/25/2013 3:20:20 PM
NO RATINGS
Rob, thanks for the explanation. Guess I haven't seen any yet, since I usually notice things like that.

Rob Spiegel
User Rank
Blogger
Re: Flying Robots
Rob Spiegel   6/25/2013 3:17:13 PM
NO RATINGS
To me, the 2013 penny feels like it's made out of a different, lighter material. The first time I held one, I thought it was a fake. I couldn't find anything online, however, that indicates it's made of different material.

Ann R. Thryft
User Rank
Blogger
Re: Flying Robots
Ann R. Thryft   6/25/2013 12:04:11 PM
NO RATINGS
Rob, you've got me curious. What's weird about the new penny?

Ann R. Thryft
User Rank
Blogger
Re: Flying Robots
Ann R. Thryft   6/19/2013 11:53:26 AM
NO RATINGS
Deberah, if you remember the name of that flying fish robot, please let us know or post a link. We might be abel to use it in a future nautical robot slideshow.



Ann R. Thryft
User Rank
Blogger
Re: Flying Robots
Ann R. Thryft   6/19/2013 11:52:06 AM
NO RATINGS
Deberah, I agree that mind-controlled robots is an interesting development in robotics. There are different research efforts underway; we covered one of them here:
http://www.designnews.com/document.asp?doc_id=254726

mrdon
User Rank
Gold
Re: Autonomous versus remote-control
mrdon   6/18/2013 6:22:56 PM
NO RATINGS
Ann,

Your quite welcome and you are so correct about the process of actualizing through visualization. Somewhere, the sparks of imagination and creativity are ignited in this process.

Ann R. Thryft
User Rank
Blogger
Re: Autonomous versus remote-control
Ann R. Thryft   6/17/2013 6:37:11 PM
NO RATINGS
mrdon, thank for the enthusiastic response. I think it's your second suggestion: those of us who've been reading science fiction for years while technology has been progressing to the point where we can actualize what we've been visualizing. I think this is true in robotics, in consumer electronics, and in film (Lord of the Rings, Avatar, e.g.).

Ann R. Thryft
User Rank
Blogger
Re: FLYING ROBOTS
Ann R. Thryft   6/17/2013 6:36:04 PM
NO RATINGS
Thanks for your feedback, bobjengr. It's comments like yours that inspire me to find even weirder, more talented robots :) No sarcasm implied, I really mean it. And yes, it's tough to keep up with all this: the pace of change is mind-boggling, and reminds me of several earlier, similar phases in Silicon Valley when enough brilliant minds and research dollars, plus the right levels of underlying enabling technologies converged to produce world-changing products. You know, like the iPhone and Web browsers.

Page 1/5  >  >>
Partner Zone
More Blogs
MIT’s Senseable City Lab recently announced the program’s next big project: “Local Warming.” The concept involves saving on energy by heating the occupants within a room, not the room itself.
The fun factor continues to draw developers to Linux. This open-source system continues to succeed in the market and in the hearts and minds of developers. Design News will delve into this territory with next week's Continuing Education Class titled, “Introduction to Linux Device Drivers.”
The new draw-it-on-a-napkin is the CAD program. As CAD programs become more ubiquitous and easier to use, they have replaced 2D sketching for early concepting.
A University of Chicago graduate has invented a compact elliptical trainer that lets people work out at their desk while they work.
New developments in sensors span a wide range of applications in all areas of manufacturing and plant automation.
Design News Webinar Series
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
7/17/2014 11:00 a.m. California / 2:00 p.m. New York
6/25/2014 11:00 a.m. California / 2:00 p.m. New York
5/13/2014 10:00 a.m. California / 1:00 p.m. New York / 6:00 p.m. London
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Aug 4 - 8, Introduction to Linux Device Drivers
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: August 12 - 14
Sponsored by igus
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service