That's right about BP, Ann. One of the gauges was working and indicating that pressure was building. Instead, BP personnel chose to trust a broken gauge that indicated everything was fine. At least, that's what the book on the accident claimed.
Rob, as many have pointed out here, correctly working gauges and meters are only as good as the people reading them--or not reading them. The BP disaster was due at least in part to faulty oversight, i.e., lack of/incorrect monitoring.
Bob from Maine, I suppose one approach to this is to replace the gauge during scheduled downtime. That would mean some gauges would be inoperative during the wait for downtime, but that may be the most efficiently way to deal with this problem.
Rob; One issue about gauges is they are usually direct plumbed into whatever they are monitoring. Thus a broken gauge replacement requires shutting down that entire line and exposing the contents to contamination from outside or vice versa. Putting gauges on shut-offs that permit removal without leaks and making all gauges moveable such that the 'normal' is always in the same orientation. For most processes, gauges are 'trendicators' more than an accurate readout. The percentage of defective gauges is not surprising but what may be surprising is the number of gauges that no longer serve any purpose.
The engineers and inventors of the post WWII period turned their attention to advancements in electronics, communication, and entertainment. Breakthrough inventions range from LEGOs and computer gaming to the integrated circuit and Ethernet -- a range of advancements that have little in common except they changed our lives.
Neil Fromer is the executive director of the Resnick Institute, a program for energy and sustainability at the California Institute of Technology, working to develop new ideas and research technologies related to providing a sustainable future. He spoke to us about the severity of the current drought in California and how solar energy can help prevent such situations in the future.
From home enthusiasts to workers on the manufacturing floor, everyone's imagination is captured by the potential of 3D printing. Prototyping, spare parts creation, art delivery, human organ creation, and even mass product production are all being targeted as current and potential uses for the technology.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.