HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
REGISTER   |   LOGIN   |   HELP
Blogs
Blog
Slideshow: Nautical Robots Go With the Flow
4/25/2013

Image 1 of 12      Next >

The Serpent remotely operated vehicle (ROV) from Seaview Systems is designed for exploring very small-diameter pipelines. It can investigate conduits as small as 9 inches (23 cm) in diameter, and fit around bends with a radius as narrow as 27 inches (68.5 cm). Measuring 9 inch x 9 inch x 57 inch (23 cm x 23 cm x 145 cm) and weighing 70 lb (32 kg), the Serpent runs on two 300W brushless DC motors that give it a total forward thrust of 18 lb (8 kg). With a 0.5 inch (1.3 cm) diameter fiber-optic tether, it can explore as far as 6,000 ft (1,830 m) down a pipe or tunnel. A 360-degree pan/orbit/zoom color camera and two color cameras are included, along with two 70W high-intensity LEDs. The robot also has heading, pitch and roll, and depth sensors, as well as sonar. A fiber-optic telemetry system provides up to three video channels, four RS232 channels, and two RS485 channels.   (Source: Seaview Systems)
The Serpent remotely operated vehicle (ROV) from Seaview Systems is designed for exploring very small-diameter pipelines. It can investigate conduits as small as 9 inches (23 cm) in diameter, and fit around bends with a radius as narrow as 27 inches (68.5 cm). Measuring 9 inch x 9 inch x 57 inch (23 cm x 23 cm x 145 cm) and weighing 70 lb (32 kg), the Serpent runs on two 300W brushless DC motors that give it a total forward thrust of 18 lb (8 kg). With a 0.5 inch (1.3 cm) diameter fiber-optic tether, it can explore as far as 6,000 ft (1,830 m) down a pipe or tunnel. A 360-degree pan/orbit/zoom color camera and two color cameras are included, along with two 70W high-intensity LEDs. The robot also has heading, pitch and roll, and depth sensors, as well as sonar. A fiber-optic telemetry system provides up to three video channels, four RS232 channels, and two RS485 channels.
(Source: Seaview Systems)

Image 1 of 12      Next >

Return to Article

View Comments: Newest First|Oldest First|Threaded View
<<  <  Page 2/6  >  >>
Ann R. Thryft
User Rank
Blogger
Re: Variety of water worthy robots
Ann R. Thryft   5/29/2013 11:30:32 AM
NO RATINGS
William, what was funny wasn't the thinness of the fish's profile--I've noticed that before--it was the idea of their missile launching capability. I think that's what Rob was also reacting to.



William K.
User Rank
Platinum
Re: Variety of water worthy robots
William K.   5/28/2013 7:31:16 PM
NO RATINGS
Ann, watch some of those fish in the big aquarium at your local zoo. There are a few of them that are huge when viewed from the side, and they really do become hard to see when they turn and swim away. My guess is that it is that way to confuse predators.

Ann R. Thryft
User Rank
Blogger
Re: Variety of water worthy robots
Ann R. Thryft   5/28/2013 11:36:32 AM
NO RATINGS
That is funny, William--thanks for the laugh.

Rob Spiegel
User Rank
Blogger
Re: Variety of water worthy robots
Rob Spiegel   5/6/2013 10:26:05 PM
NO RATINGS
Good point, William K. That's funny. I would imagine missile-launching capability trumps all with our sub fleet.

William K.
User Rank
Platinum
Re: Variety of water worthy robots
William K.   5/6/2013 10:00:44 PM
NO RATINGS
Rob, sometimes efficiency and streamlining are not the only consideration. Watch some of those fish at the aquarium, some very big fish disappear when they are viewed from the front or the rear. And you don't see very many fish with missile launching abilities.

Rob Spiegel
User Rank
Blogger
Re: Variety of water worthy robots
Rob Spiegel   5/6/2013 6:37:00 PM
NO RATINGS
That makes sense, William K. It looks like many of our existing water-based vehicles are rather bukly -- such as subs. But perhaps I'm wrong. Maybe they're suited for moving through water.

Ann R. Thryft
User Rank
Blogger
Re: Variety of water worthy robots
Ann R. Thryft   5/6/2013 1:51:44 PM
NO RATINGS
William is right about shape mattering even more in water than it does in air as far as a fish--or a robot's--speed, maneuverability, and efficiency and therefore power consumption. Just think how much harder it is to swim through water than to walk through air, and the muscles swimming gives your arms as a result.

Ann R. Thryft
User Rank
Blogger
Re: Variety of water worthy robots
Ann R. Thryft   5/6/2013 1:51:04 PM
NO RATINGS
Thanks Rob, I agree about the design "energy savings" made possible by biomimicry.

William K.
User Rank
Platinum
Re: Variety of water worthy robots
William K.   5/3/2013 8:24:35 PM
NO RATINGS
  • Rob, shape matters a whole lot in the water and under it, much more than it matters in air. Not only that the greater density takes a lot more power to move it out of the way, but also that the friction of moving through water is greater. One large difference though is that water is generally not compressible,at least not like air.


Rob Spiegel
User Rank
Blogger
Re: Variety of water worthy robots
Rob Spiegel   5/2/2013 9:39:35 PM
NO RATINGS
Nice link, Ann. That robot looks almost exactly like a fish. I guess if nature has already done the engineering, why create something new that likely won't be as effective.

<<  <  Page 2/6  >  >>
Partner Zone
More Blogs
Festo's BionicKangaroo combines pneumatic and electrical drive technology, plus very precise controls and condition monitoring. Like a real kangaroo, the BionicKangaroo robot harvests the kinetic energy of each takeoff and immediately uses it to power the next jump.
Design News and Digi-Key presents: Creating & Testing Your First RTOS Application Using MQX, a crash course that will look at defining a project, selecting a target processor, blocking code, defining tasks, completing code, and debugging.
These are the toys that inspired budding engineers to try out sublime designs, create miniature structures, and experiment with bizarre contraptions using sets that could be torn down and reconstructed over and over.
PowerStream is deploying the microgrid at its headquarters to demonstrate how people can generate and distribute their own energy and make their homes and businesses more sustainable through renewables.
Printrbot unveils its all-metal Printrbot Simple, bringing durability to low-cost 3D printers.
Design News Webinar Series
3/27/2014 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
2/27/2014 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
12/18/2013 Available On Demand
11/20/2013 Available On Demand
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Apr 21 - 25, Creating & Testing Your First RTOS Application Using MQX
SEMESTERS: 1  |  2  |  3  |  4  |  5


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: April 29 - Day 1
Sponsored by maxon precision motors
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service