Based on the DLR Hand II, the German Aerospace Center (DLR) and the Harbin Institute of Technology (HIT) jointly developed the DLR/HIT Hand II as a medium-cost multisensory robotic hand. The DLR/HIT Hand II has five fingers, each with three actuators, that are identical except that one of them has an additional drive to make it work as an opposing thumb. To fully emulate human fingers' motor functions, each finger has four joints, not three, and each joint has force and position sensors. The DLR/HIT Hand II has a total of 15 degrees of freedom (DOF), compared to 13 in the original DLR Hand II. Fingers are equipped with slip-resistant gripper surfaces. Integration of drives and electronics within the hand itself is intended to make it easier to mount on a wide variety of robot arms.
(Source: German Aerospace Center (DLR))
Isn't that true, Chuck? Making robotic movements fluid is still something that engineers need to work on. I saw this recent story that was quite interesting...about a robotic arm that creates delicate art: http://www.fastcodesign.com/1671977/watch-delicate-art-made-with-a-massive-robotic-arm#1
Last week, I visited Worcester Polytechnic Institute's robotics department. WPI was the firs university in the nation to offer a BS degree in robotics. See my first of two reports in Students Design Robots.
This report looks at the over all program. Tomorrow's will look at a specific project.
“It's amazing the amount of research and effort going into this area.”
@apresher: Exactly some amazing robotic stuff. I fear that the world might not need humans to do work hereafter. A plus as well as a risk that might hit the world if it not being used properly.
Unlike industrial robots, which suffered a slight overall slump in 2012, service robots continue to be increasingly in demand. The majority are used for defense, such as unmanned aerial vehicles (UAVs); and agriculture, such as milking robots.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.