Based on the DLR Hand II, the German Aerospace Center (DLR) and the Harbin Institute of Technology (HIT) jointly developed the DLR/HIT Hand II as a medium-cost multisensory robotic hand. The DLR/HIT Hand II has five fingers, each with three actuators, that are identical except that one of them has an additional drive to make it work as an opposing thumb. To fully emulate human fingers' motor functions, each finger has four joints, not three, and each joint has force and position sensors. The DLR/HIT Hand II has a total of 15 degrees of freedom (DOF), compared to 13 in the original DLR Hand II. Fingers are equipped with slip-resistant gripper surfaces. Integration of drives and electronics within the hand itself is intended to make it easier to mount on a wide variety of robot arms.
(Source: German Aerospace Center (DLR))
As it turns out, developing robot hands for amputees and others with hand/arm problems is a somewhat different set of design problems from developing them for industrial uses. We've covered a few of those in DN.
Thanks for the link Elizabeth. That reminds me of the ABB robot arm painting people's dreams--actually, taking sensor data of sleeping people: http://www.designnews.com/author.asp?section_id=1386&doc_id=254180
Your comment, Ann, makes me think about how much we can learn about human movement in the development of robots...even as engineers mimic human movement to develop robots. I would have never looked at the pinky quite that way, but it's true, isn't it?
It's pretty incredible, isn't it, Chuck? We don't often think of robots creating art, mostly just performing mechanical tasks. So it's interesting to see a robot taking a different tack to do something purely for the sake of beauty. And not so scary, though, if you think that ultimately a human did create all of that! Funny, though, how we think of robots as their own, autonomous beings, and forget sometimes humans are behind them (in terms of programming, development etc.).
GTOlover: When I think of the importance of a pinky on a robot, I always think of the scene from the movie Jurassic Park, where the robotic hands gently lift and re-position the dinosaur eggs. Pinkies definitely have an important role in minimizing handheld forces.
The Internet happened.” Those three words spoken yesterday by Marc Ostertag, North America president of B&R Automation at Pacific Design & Manufacturing, now taking place in Anaheim through Feb. 11, continues to bring ever-lasting changes to our ways of life and will undoubtedly transform manufacturing.
When you think of the DARPA Robotics Challenge, you may imagine complex humanoid contraptions made of metal and wires that move like a Terminator Series T-90. But what actually happened at the much-vaunted event was something just a bit different.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.