HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Blogs
Blog

My Opinion on the IoT: It Isn't Just for Consumers

NO RATINGS
View Comments: Oldest First|Newest First|Threaded View
naperlou
User Rank
Blogger
happening fast
naperlou   3/26/2014 11:51:21 AM
NO RATINGS
Rich, at our house we are approaching the number you mentioned very quickly.  Actually, one of ours moved away, so we experienced a drop in the number of devices.  That is back on the rise, though.


I would expect on the smart manufacturing end, the issue is sunk cost.  Most industrial machinery needs to be kept for a period of time to justify the cost.  The 13% penetration you mention says to me that there is lots of room to grow in this market.

William K.
User Rank
Platinum
"Don't need the internet to see which way the wind blows"
William K.   3/27/2014 2:59:27 PM
NO RATINGS
While it might be more convenient to use an internet connection to monitor each machine in amplant, it is not nessesary to do it that way. Tenty five years ago the company that I worked for provided direct communication systems to some of their machines installed at a major auto plant, with no internet anything anywhere around. The best part was that the connection was quite secure from end to end, and nobody in the IT group had to do anything to protect it. It is still possible to have total data reporting using hardwired connections, and know that a system is safe from outside hackers. While the initial expense of installing a wired non-internet connection would be hired, a whole lot of money would be saved by not having to guard against the thousands of hackers on the internet. The fact is that there is indeed an advantage to having a system be totally private and speaking a language unknown to outsiders.

Of course it would make providing access to everybody a lot less convenient, but is having an intruder-proof system woth that inconvenience? For many companies it would be.

cary2
User Rank
Iron
Change must be incremental
cary2   4/24/2014 3:37:31 PM
NO RATINGS
  There are a number of reasons for pharm. manufacturing to resist IoT. It' s ironic that a 'Quality' Organization performs the study. 

A. It needs be applied to a large I/O application; no point in putting the energy into a small system. So, the entire large system needs validation of the (over-laying?), or intimate SW and applied algorithms. Bottom line: It's NOT done in-house; so from the get-go, there is a 'quality', reliance on an outside third party.  Failure at 4 in the morning- call them. Need to upgrade the SW,: call them. Need to replace worn tired devices that (may) or maynot need updating: rely on THEM.  You see where the costs, potential down-time, and sustainable 'quality' may suffer.

B. 50% of the time, the errors in a system are not the working system, they are failures in the sensors; adding MORE sensors can increase that ratio.

C. FDA rules regarding any device labelled a 'Processor' requires special attention if that part needs replacing. I.E. : if a processor needs replacing, than the replacement requires TOTAL revalidaton. It must have the same REV, same, prom rev, same everything... and then requires revalidation.  The goal in keeping a system, or device serviceable is to keep PROCESSORS to a minimum. As a simple example: if you have a cold room whose electronic thermostat fails, you relpace it, and reprogram it's settings. IF that same device was 'described' as a PROCESSOR in the system description in stead of calling it a thermostat, then you must, by FDA guidelines, re-validate ALL the functions (bracket the temperature use range) of that cold room again... which means empty it, and spend three days documenting performance. Avoiding 'smart processors'  and minimizing periphreal 'processor' based devices that could negatively impact the 'quality' of a product, impact inter-process  down-time, or lengthen down-time is to be avoided. 

Partner Zone
More Blogs
Engineer comic Don McMillan explains the fun engineers have with team-building exercises. Can you relate?
The damage to Sony from the cyber attack seems to have been heightened by failure to follow two basic security rules.
Reshoring is picking up steam, but it's not outpacing the overall continuing growth in outsourcing.
Here's a variety of views into the complex production processes at Santa's factory. Happy Holidays!
The Beam Store from Suitable Technologies is managed by remote workers from places as diverse as New York and Sydney, Australia. Employees attend to store visitors through Beam Smart Presence Systems (SPSs) from the company. The systems combine mobility and video conferencing and allow people to communicate directly from a remote location via a screen as well as move around as if they are actually in the room.
Design News Webinar Series
12/11/2014 8:00 a.m. California / 11:00 a.m. New York
12/10/2014 8:00 a.m. California / 11:00 a.m. New York
11/19/2014 11:00 a.m. California / 2:00 p.m. New York
11/6/2014 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Jan 12 - 16, Programmable Logic - How do they do that?
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  67


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service