Fully Integrated Automation Lives in the PLC

View Comments: Newest First|Oldest First|Threaded View
<<  <  Page 2/2
William K.
User Rank
Re: But are the functions really separate?
William K.   1/24/2014 3:00:46 PM
I know that they are saying that, but I have not heard any explanation of facts that would validate the claim. It is one thing to make an assertion and a somewhat different thing to be able to explain in detailwhy it is true. My feeling is that they have not covered all of the failure modes that I have seen. So if they would like to place a really detailed article in Design News about the actual mechanism of why their combined system is safer I would certainly be happy to read it.

Rob Spiegel
User Rank
Re: But are the functions really separate?
Rob Spiegel   1/24/2014 10:21:35 AM
You're not alone with this skepticism, William K. Certainly for years it was unheard of to combine both functions on the same network. But the safety folks are saying these combined networks are safer than the old single-duty safety networks.

William K.
User Rank
But are the functions really separate?
William K.   1/24/2014 9:46:45 AM
I keep seeing the claims that somehow safety functions and control functions all using the same processor can offer complete separation and 100% reliability. Of course there are a few hardware parts that are common to both of them and it is a challenge to imagine that if excessive enclosure temperature causes one part of the processor to lock up that the other part will continue to function as it should. And a power supply failure would probably shut the whole package down, as well. So while automation has become simpler and less expensive it does not make sense to go to those extremes of combining everything, even if it does reduce the initial prices.

<<  <  Page 2/2
Partner Zone
More Blogs
We celebrate Halloween with a look at 13 of the scariest technology-based horror movies of all time, as well as some real-life technologies that bare a frightening resemblance to what's on screen.
When Charlie Miller and Chris Valasek made headlines by hacking and crashing a Jeep last year, the event followed many months of study and trials.
With a better understanding of materials’ response to load and temperature, researchers could potentially use the knowledge to improve design. The research could even help geologists studying plate tectonics.
A panel on cybersecurity at ARM TechCon called for regulations to protect the security of connected devices.
The design of products has been altered altogether through 3D printing. Parts that couldn’t be produced at all before 3D printing came along are often superior to conventionally produced parts.
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 10 - 14, Embedded System Design Techniques™: Getting Started Developing Professional Embedded Software
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7 | 8 | 9 | 10

Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Course November 8 - 10:
Sponsored by 3M
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Technology Marketplace

Copyright © 2016 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service