HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
REGISTER   |   LOGIN   |   HELP
Blogs
Blog

Fully Integrated Automation Lives in the PLC

NO RATINGS
View Comments: Newest First|Oldest First|Threaded View
Page 1/2  >  >>
Rob Spiegel
User Rank
Blogger
Re: But are the functions really separate?
Rob Spiegel   1/29/2014 2:10:26 PM
NO RATINGS
William K, it should certainly be interesting. Thanks for the idea.

William K.
User Rank
Platinum
Re: But are the functions really separate?
William K.   1/29/2014 2:03:04 PM
NO RATINGS
Rob, I am certain that it will gather a lot of attention and interest quite a few folks. Safety goes way beyond just being safe, it also seems to require that industrial equipment, at least, be guarded against those who are way beyond just incompetent. 

So it will be very interesting to see what some of the manufacturers, such as Siemens, have to say about thier safety systems.

Rob Spiegel
User Rank
Blogger
Re: But are the functions really separate?
Rob Spiegel   1/29/2014 6:25:36 AM
NO RATINGS
Well, Willliam K, perhaps the next step in our conversation on this subject is for me to go out and see what people are asying about this. So I'll do the story.

William K.
User Rank
Platinum
Re: But are the functions really separate?
William K.   1/28/2014 4:26:53 PM
NO RATINGS
Ten years is probably a long enough time for that constantly repeated assertion to have taken on an " aura of correctness", no matter what. But all of those mechanisms for keeping the systems independant should be covered by patents now and so be something that can be discussed with the engineering community. And I am one who would really like to hear how a hardware fault in a processor only affects part of that processor. Of course, over the years, I have come across digital ICs that had partly failed, but not very many of them.

Rob Spiegel
User Rank
Blogger
Re: But are the functions really separate?
Rob Spiegel   1/28/2014 11:47:24 AM
NO RATINGS
Good point, WilliamK. The hype has been universal. It's been years since I have heard anyone argue for separate networks for control and safety. When I first covered this subject 10 years ago, the majority of plant operators I spoke with wanted separation. Now I don't hear anyone say that.

William K.
User Rank
Platinum
Re: But are the functions really separate?
William K.   1/27/2014 3:37:36 PM
NO RATINGS
Thanks, that is why I suggested it. Probably quite a few engineers would want to see what the reality is, aside from the hype. How are those two functions kept independant and yet in the same box.

Rob Spiegel
User Rank
Blogger
Re: But are the functions really separate?
Rob Spiegel   1/27/2014 10:26:45 AM
NO RATINGS
That's a great article idea, William K. I'll look into that.

William K.
User Rank
Platinum
Re: But are the functions really separate?
William K.   1/26/2014 4:48:28 PM
NO RATINGS
I am certain that some of the potential failure modes have been avoided on the safety section of the all-in-one-system PLC packages, but short of being truly triple redundant it is not reasonable to anticipate that they are 100% safe. And it would be very worthwhile to read the actual user documentation and see what disclaimers and warnings are there that don't make it to the advertising areas. 

In short, when a set of claims are simply too good to be true, I usually doubt that they are true. That attitude has saved me from a couple of disasters over the years. 

taimoortariq
User Rank
Gold
Re: But are the functions really separate?
taimoortariq   1/25/2014 11:00:17 PM
NO RATINGS
William, I understand your point. But I am sure that they must have done alot of rigourous experiments to check and finally verify the device, as SAFE. I mean I dont exactly know the internal architecture of the PLC security module, but if they are selling the product all around the world, they must have made it very robust under the fail conditions. Obviously, no system is 100% fool proof, but when they say that relatively this system is more reliable and safe then the other one. Than they must have made it more safer.

taimoortariq
User Rank
Gold
making lives easy
taimoortariq   1/25/2014 10:46:35 PM
NO RATINGS
Nice Article Rob, Smarter PLC's certainly makes lives much easier. To get stuck with the setup and configuration problems can be quite time consuming and equally frustrating. To have every thing combined in one PLC is a treat for a control engineer.

Page 1/2  >  >>
Partner Zone
More Blogs
Festo's BionicKangaroo combines pneumatic and electrical drive technology, plus very precise controls and condition monitoring. Like a real kangaroo, the BionicKangaroo robot harvests the kinetic energy of each takeoff and immediately uses it to power the next jump.
Design News and Digi-Key presents: Creating & Testing Your First RTOS Application Using MQX, a crash course that will look at defining a project, selecting a target processor, blocking code, defining tasks, completing code, and debugging.
These are the toys that inspired budding engineers to try out sublime designs, create miniature structures, and experiment with bizarre contraptions using sets that could be torn down and reconstructed over and over.
PowerStream is deploying the microgrid at its headquarters to demonstrate how people can generate and distribute their own energy and make their homes and businesses more sustainable through renewables.
Printrbot unveils its all-metal Printrbot Simple, bringing durability to low-cost 3D printers.
Design News Webinar Series
3/27/2014 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
2/27/2014 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
12/18/2013 Available On Demand
11/20/2013 Available On Demand
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Apr 21 - 25, Creating & Testing Your First RTOS Application Using MQX
SEMESTERS: 1  |  2  |  3  |  4  |  5


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: April 29 - Day 1
Sponsored by maxon precision motors
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service