The Importance of Mentors

View Comments: Newest First|Oldest First|Threaded View
<<  <  Page 3/5  >  >>
User Rank
Re: Re : Mentors
jmiller   11/30/2013 3:06:47 PM
When I read articles like this t reminds me to take time to help whenever I can because we never know when what we say will truly make a difference in someones career or even life.  No one thing is too small. 

User Rank
Enjoy your Retirement
zeeglen   11/30/2013 11:29:12 AM
Mentoring is a lifelong act of take and give.  Take the knowledge your mentors give when young, then give back that knowledge to the young when older.

Enjoy your retirement, Jon.

User Rank
a.saji   11/30/2013 11:17:46 AM
@bob: Indeed, to make your career a success, you do need to focus and concentrate on it. You alone cannot do it. Its always good to give your thoughts to someone else and gain the output from there. Then you can compare and think which one to do.                                

User Rank
bobjengr   11/30/2013 9:32:48 AM
So true Jon.  I also had the benefits of mentoring early in my engineering career.   Bob Ditto was the very first person I worked for as a coop and was certainly instrumental in keeping me in engineering.  As we all know, the rigor and focus needed to complete an engineering course of study is definitely there.  While others were partying, we had to study.  Bob was behind me all the way and was always available for counsel and a quick phone call.  He was a mechanical engineering graduate from Perdue and one of very best teachers I have ever had.  He passed away this year at the age of 92.  I also mentor through "We Teach Science" and find it to be very rewarding.  Excellent post.

User Rank
Re: Re : Mentors
Pubudu   11/30/2013 1:18:33 AM
True Anandy We all has a mentor in our minds from the childhoods. These Mentors will have the same characteristics that we like to have in our lives. These Mentors can be either positive or negative; by associating the good/positive mentors we will also have the positive character.  

User Rank
Re: tx: you've been a great mentor!
Pubudu   11/30/2013 1:10:59 AM
Very true a.saji, It will always will be a great push for the life by having a great mentor. Evan in our childhood also we have a mentor in the form or hero it may be a cartoon character.  So it is very important to guide our child hood to the positive character in order to have a better future. 

User Rank
How Do I Become A Teacher At A Community College?
RailroadGeek   11/29/2013 11:18:36 PM
On the subject of mentoring, I'm an electronic tech (but not a college graduate) and I give a lot of lectures as part of the ongoing training in my department at our municipal transit agency.

Some of the techs are really impressed with my lectures and they have asked me if I ever considered becoming a teacher. So now I'm seriously considering the idea.

A college professor requires a PHd, however I was thinking about teaching electronics just at a community college or vocational school.

Does anyone in the engineering profession have any experience with teaching at a community college? If so, how did you go about getting a teacher's certification?


William K.
User Rank
The value of good teachers
William K.   11/29/2013 10:37:29 PM
John, Thanks for the interesting post. I have had some teachers who made subjects interesting, one even made calculus interesting. And an eighth grade science teacher who did make things interesting, back a long time ago. 

In addition, I have been a mentor of sorts to quite afew people who while having degrees were quite lacking in much understanding of how things actually worked in engineering. And several of them I had to explain somethin g that I learned from one college engineering teacher. I call it "the Maselowski criteria", and it consists of asking "is this answer reasonable?"  One time we had to apply that to a very large servo system used to run truck rear axles under load. The engineer could not get the system to stablize, which I discovered was because the gain was set way too high. He showed me that math that he had used to determine the gain settings, and while I could not see any error, the number was an order of magnitude higher than it needed to be. So we set the gain down and the system was stable, and then he could advance the derivative gain as well as the proportional gain, and make it work in a stable and accurate manner. From then on I got questions from a lot of folks at that place when they had problems. And I always explained my answers.

User Rank
wbswenberg   11/29/2013 1:14:21 PM
Congradulations John!  You are getting out alive.  I just retired in May @ 60 & 6 months.  I'm so buzy I dont know which way is up.  I worked 36 years - 25 years at Boeing.  Just taking up Cowboy action shooting and I'm a real dude!  ER drug store cowboy what ever.  Partly rebuilding the 350 in my big truck.  Just turned my rental around for the last time to the tume of $25K expense.  

Have fun - be safe.

Barbed Wire Bill

User Rank
Re: tx: you’ve been a great mentor
AnandY   11/29/2013 12:30:14 PM
I have been a keen and avid follower of your posts here and its sad to think that I won't have the pleasure of doing so for much longer. I sure hope you will still find time to post some of your informative pieces here once in a while. Thank you Jon, you have been very helpful to us all; a real mentor.

<<  <  Page 3/5  >  >>
Partner Zone
More Blogs
These are the toys that inspired budding engineers to try out sublime designs, create miniature structures, and experiment with bizarre contraptions using sets that could be torn down and reconstructed over and over.
PowerStream is deploying the microgrid at its headquarters to demonstrate how people can generate and distribute their own energy and make their homes and businesses more sustainable through renewables.
Printrbot unveils its all-metal Printrbot Simple, bringing durability to low-cost 3D printers.
Today's robots should be respected, and humans should be wary of their growing skills and sophistication. Quite simply, robots are better than us in a lot of ways. Here are 10 of them.
Product design is changing with advances in technology and outsourced manufacturing. The Art of Product Design spells out the future of design engineering.
Design News Webinar Series
3/27/2014 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
2/27/2014 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
12/18/2013 Available On Demand
11/20/2013 Available On Demand
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Apr 21 - 25, Creating & Testing Your First RTOS Application Using MQX
SEMESTERS: 1  |  2  |  3  |  4  |  5

Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: April 29 - Day 1
Sponsored by maxon precision motors
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service