Researchers at Disney have developed a technology that can generate enough energy from the movement of a fingertip to light a string of LEDs or to control lights or other electrical components on e-paper or printed materials.
The Paper Generator -- developed primarily by Disney Research scientists in Pittsburgh -- relies on the placement of a sheet of polytetrafluoroethylene (PTFE), more commonly known as Teflon, between two thin reactive layers of material like metalized polyester that act as electrodes. Researchers Mustafa Emre Karagozler, Ivan Poupyrev, Gary Fedder, and Yuri Suzuki describe the new technology in this paper. It seems like an energy-harvesting version of touch technologies used in mobile devices. The user rubs, taps, or slides a finger over the materials to generate electricity.
The Paper Generator harvests energy when the user rubs, taps, or slides a finger over a thin sheet of Teflon sandwiched between two thin sheets of reactive material. Invented by researchers at Disney Research, the technology could be used to power small devices or interactive technologies for e-games or displays. (Source: Disney Research)
A key component of the technology is the leveraging of electrets (materials with electrical properties) already used in microphones and MEMS devices. When the reactive paper layer rubs against the Teflon sheet, an electrical charge accumulates. If the electrons move relative to one another against the Teflon -- the action caused by the rubbing or sliding -- it generates a small current that can power a number of devices, the researchers wrote in their paper.
The operation of the Paper Generators relies on the movement of the two conductive sheets relative to each other and the electric field source, i.e., PTFE. As the relative positions of the sheets change, the distribution of the induced charges, the electric field, and the total capacitance between the sheets change, resulting in an electric potential difference between the conductors... Hence, the mechanical movements of the sheets and the field source are converted into electrical potential energy that can do work.
Poupyrev, director of the Pittsburgh interaction group for Disney Research, told us in an email that the Paper Generator can eliminate the need for power sources for some small devices, such as infrared communication devices or LED displays. This would make it easier for designers to add visual and audio technology to printed and e-paper materials. "We can imagine any number of ways to use this to add sights, sounds, and other interactivity to books and other printed materials inexpensively and without having to worry about power sources."
He would not discuss how Disney will employ the technology.
"you make a very good point. If enough power could be generated to power the entire toy and not just some kind of light or gizmo on the top, then this technology would be even more useful."
Elizabeth, I had seen similar thing in Chinese toys. Toys are working with a mechanical key and we have to key it before it starts. When it performs, the mechanical movements are converting into electrical energy for performing other functionalities like sound, light, obstruct detection etc.
Conductive paints sound like a really interesting idea, too, Jack B. And a company called Pavegen already has invented energy-harvesting tiles that use people's footfalls, which is really quite cool: http://www.designnews.com/author.asp?section_id=1386&doc_id=262295
It will be interesting to see where this could lead to in the future. With conductive paints, and paper circuits the printed page may never be the same. Scaling it up you could harvest the energy of people walking over a surface or traffic rolling over a highway. Great write-up!
Great idea. As for the TV watching, I rarely watch, but the TV is 200+ channels of uselessness. When I do sit down to watch, the remote is in constant use channel surfing. I usually end up turning off the TV and working on one of my hobbies.
you say " Some mechanism for converting the toy activity to a self powering mode will be very good"
That sounds like a recipe for a perpetual motion machine. I'm waiting to see the prototype. On the other hand, if you have an idea how I can harvest my 3 boys' excess energy for useful purpose (there is plenty, efficiency is not an issue), then you have my full and undivided attention.
Now that is a fine idea, GTOLover. How annoying is it to continuously push the button of the remote to try to change a channel with no success and then realize you're out of batteries and have to go searching around for some. I'm sure that can be done.
Most machine design engineers will survey existing component manufacturers for standard linear guide products, limiting what they can do with their designs. Using extruded aluminum profile guides can customize machine designs while shrinking the bill of materials.
Weaned on the relatively effortless connectivity of today’s massive variety of consumer electronic products, automation users in the IIoT will likely not tolerate too many competing, piecemeal standards for long. And the Industrial Internet Consortium is trying to preempt history.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.