HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Blogs
Blog

Account for Uncertainty

NO RATINGS
View Comments: Threaded|Newest First|Oldest First
Battar
User Rank
Platinum
2 Methods
Battar   11/12/2013 9:22:14 AM
NO RATINGS
Two equivalent methods to reduce uncertaincy:

1: Take a measurement from several sensors and average them

2: Take several measurements from one sensor and average them.

SherpaDoug
User Rank
Gold
Real measurement errors
SherpaDoug   11/13/2013 9:27:38 AM
NO RATINGS
Real errors are rarely Gaussian.

tekochip
User Rank
Platinum
Re: Real measurement errors
tekochip   11/14/2013 9:32:41 AM
NO RATINGS
Very true!

 
A slightly different scenario, but I recall a technician sorting 10% resistors, trying to find a handful that were exactly the correct value.  He went through an entire bag and couldn't find any closer than 5%.  So much for Gaussian distribution.  Of course the reason was that all of the closer value resistors were already removed from the sample by the manufacturer to be sold as 5% resistors.


Nancy Golden
User Rank
Platinum
Uncertainty in Measurements
Nancy Golden   11/13/2013 10:06:48 AM
NO RATINGS
Great article Jon - it is important to understand uncertainty in measurements so that you can understand whether or not a reading is really within tolerance. Understanding the tolerance that is acceptable (range of acceptable readings due to measurement uncertainty not only of test equipment but also the device under test) are both important to understand. Repeatability and reproducibility are also factors. Gage R & R is an important tool in this area. Uncertainty is also another reason to make sure your measurement equipment is in calibration. Thanks for the link to the Evaluation of Measurement Data: Guide to the Expression of Uncertainty in Measurement - it is an excellent resource.

Ratsky
User Rank
Platinum
Other factors too!
Ratsky   11/13/2013 1:12:16 PM
NO RATINGS
There are other real-world factors that this analysis ignores.  One is calibration accuracy, another is calibration drift.  A typical calibration cycle is annually.  The day after an instrument is calibrated, the uncertainty can increase because of component aging, ambient temperature effects, etc.  Reality always makes uncertainty increase, often well beyond the simplistic approach of resolution; it's close to the concept of entropy. Resolution puts a LOWER BOUND on uncertainty, but no upper one!  That is the worst part of digital instrumentation, in that it misleads the user to trust the results far beyond what is merited.

Partner Zone
More Blogs
The Internet happened.” Those three words spoken yesterday by Marc Ostertag, North America president of B&R Automation at Pacific Design & Manufacturing, now taking place in Anaheim through Feb. 11, continues to bring ever-lasting changes to our ways of life and will undoubtedly transform manufacturing.
A panel session on the advanced manufacturing workforce at the Pacific Design and Manufacturing show in Anaheim this week revealed a major skills gap.
The winners of the 2016 Golden Mousetrap Awards were crowned last night during a live ceremony in Anaheim, Calif.
The marriage of mechatronics know-how and advanced software tools is refining dynamic machine performance using measurements and innovative motion algorithms.
When you think of the DARPA Robotics Challenge, you may imagine complex humanoid contraptions made of metal and wires that move like a Terminator Series T-90. But what actually happened at the much-vaunted event was something just a bit different.
Design News Webinar Series
1/28/2016 11:00 a.m. California / 2:00 p.m. New York
12/8/2015 11:00 a.m. California / 2:00 p.m. New York
2/18/2016 11:00 AM PT | 2:00 PM ET
2/24/2016 11:00 AM PT | 2:00 PM ET
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Jan 11 - 15, Designing ARM Devices Using Segger Tools
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7 | 8 | 9


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2016 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service