Most flying robots, but not all, are small, so they can access hard-to-reach places. Some designed to emulate insects can be as tiny as real insects. Most flying robots use a helicopter-style design (three to 12 or more rotors) or emulate the movements of birds. Some bird-like designs glide. Others incorporate the much more difficult-to-achieve locomotion of flapping.
Flying robots can serve a wide variety of purposes. Many work in swarms, cooperating with one another to accomplish their tasks. Surveillance, reconnaissance, and search and rescue in military and first responder situations are popular applications for aerial robots.
Yet not all these robots are considered unmanned aerial vehicles. Some have been used to assemble architectural structures or perform agricultural duties such as crop dusting or pollination. Many are autonomous. Some are remote-controlled, and some are autonomous robots with real-time communication from remote pilots.
Click the image below for a slideshow of examples of these robots.
The Nano Air Vehicle, a DARPA-funded hummingbird-like demonstrator robot made by AeroVironment, flaps its wings to fly in any direction. The remote-controlled Nano can hover with precision like the real bird, and it can fly clockwise and counterclockwise. It weighs 19gm (0.67oz), including batteries, video camera, motors, and communications systems, and it has a wingspan of 16cm (6.3 inches). Its size and weight are within the range of real hummingbirds, and, like them, it uses its wings for control and propulsion. The Nano can hover continuously on its own power source for eight minutes. It can shift from hovering to a forward flight speed of 17.7kph (11mph). While hovering, the Nano can tolerate side wind gusts of up to 8kph (5mph) without losing more than 1m (3.28 feet) of altitude. (Source: AeroVironment)
Pubudu, you're welcome. I wrote a previous article on RoboBee: the link is given in the Related posts list at the end of this article. That prior article states that the RoboBee is currently powered and communicated with via its tether. We also state that this is a prototype, and the next step will be to make it un-tethered.
I am absolutely amazed at the rapid pace of this technology. The devices themselves plus the ability to control and maneuver seem to improve every time I read a report. It's also becoming apparent there are more and more research facilities involved with development. You Ann have indicated over the recent months uses that make the developments relevant and newsworthy. Great post. I really appreciate you keeping us up to date.
Pubudu, I think you're asking if RoboBee weighs 80 mg including its camera and comm system, correct? It does seem insanely lightweight, but that's what the team's video and accompanying text posted here: http://www.youtube.com/watch?feature=player_embedded&v=b9FDkJZCMuE#at=16 and here: http://www.sciencemag.org/content/340/6132/603.abstract?sid=74040285-fcde-418a-9a07-b727380cc7e0
taimoortariq, I agree that flying robots are tough to design properly. Robots that must swim are probably at least as tough to design, for somewhat different reasons, as commenters have pointed out in discussions on our nautical robot articles and slideshows.
Mind controlled Robot is the new technology that is comming up .The question is how it can work ? people were asked to wear a cap consisting of 64 sensors and think they have to move towards right, left or straight thoughts that triggered neuons were captured and programmed in the robot in this way in future robots will be moving just with mind control other than moving your hands, body and so on .
I have heard that some researchers of Stanfford University have developed a Robot that jump and glides like a fish . Spring made of carbon fibres are created that are used during take off .This robot cant jump as high as other flying robots but its jump can cover a large horizontal distance . Initially it was created as an unmanned robot but there are certain issues which it is facing in its autonomy .
No doubt this is an excellent article, As we know technology is expanding at a very rapid rate robots are becomming common .Initially work was done on robotic technology on a very low level but now researchers and students of engineering universities are taking too much interest in robotic development . Nodoubt Robotic bee and Bionic opter is an example of human creativity i really liked the idea and this shows where human minds can go in terms of development .
If a major catastrophe strikes your area, will you be prepared? Do you know how to modify the tech you've already got or MacGyver what you need to fit your own situation? A free, five-day Continuing Education Center course starting April 6 will show you how.
NanoSteel Co., which develops high-performance steel alloys, began producing steel powders for additive manufacturing (AM) last year and now supplies them commercially for freeform laser deposition and laser powder bed fusion processes.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.