After 10 years of hard work, an engineering team working in Harvard University's Microrobotics Lab has completed the maiden flight of its tiny RoboBee flying robot. True, the little guy is still tethered and not autonomous yet, but the controlled flight of the insect-sized robot that flaps its wings is considered a first in robotics.
The tiny robot weighs 80 mg (0.002 oz), has a wingspan of 3 cm (1.18 inch), and a body frame made of carbon fiber. It beats its independently controlled wings, which are actuated via piezoelectricity, 120 times per second. Power and control signals are sent through the tether to the robot. In the video below, you can watch the robotic bee's flight in the laboratory's motion capture environment. It's shown hovering and moving laterally.
An engineering team working in Harvard University's Microrobotics Lab has completed the maiden flight of its tiny RoboBee flying robot, which weighs 80 mg and has a 3 cm wingspan. Modeled on a fly's body and movements, RoboBees will eventually be untethered and fly in swarms. (Source: Kevin Ma and Pakpong Chirarattananon/Harvard University)
At this small scale, tiny changes in air movement can have an even larger effect on the robot's flight dynamics and its rotational movements. Independent control of each wing makes it easier to control the robot's flight. (Source: Kevin Ma and Pakpong Chirarattananon/Harvard University)
Flying robots that flap their wings, like Festo's partially autonomous SmartBird or MIT's remote-controlled Phoenix, can be harder to design and actuate than robots with fixed wings that soar or quadrotors that hover. Part of the challenge is in controlling the robot's movements, since flapping wings' movements are much more complex than gliding wings' movements. Flapping wings also have more of an effect on the twisting and turning of the robot's body.
Independent control of each wing -- such as Festo has achieved with its highly sophisticated, four-winged BionicOpter dragonfly robot -- makes it easier to control the robot's flight. But the RoboBee is made at such a small scale that tiny changes in air movement can have an even larger effect on the robot's flight dynamics and its rotational movements. That meant the team had to design a control system with very fast reaction times.
Another major challenge for the Harvard team was in finding components and materials small enough for a robot that's not much bigger than a quarter. Flight muscles and actuators, such as electromagnetic motors, are much easier to come by for larger flying robots. The RoboBee's piezoelectric actuators are tiny strips of ceramic material that expand or contract in response to the application of electricity. Its joints are thin plastic hinges embedded in its body frame. The reason the RoboBee is still on a tether also has to do with its size: there are no energy storage devices small enough, such as fuel cells with high energy densities, at least not yet.
The team was inspired to develop the RoboBee's body and movements by those of a fly: it can take off vertically and hover. However, the RoboBee project, led by Robert J. Wood -- professor at the Harvard School of Engineering and Applied Sciences (SEAS), a Core Faculty Member at Harvard's Wyss Institute for Biologically Inspired Engineering, and founder of the Microrobotics Lab -- is aimed at creating fully autonomous robotic swarms. Possible uses will include search and rescue, pollination of agriculture crops, and distributed environmental monitoring.
The team published its findings in an article (purchase or subscription only) in Science magazine. Graduate students Pakpong Chirarattananon and Kevin Y. Ma are co-lead authors, and the third author is Sawyer B. Fuller, a postdoctoral researcher. The research received funding from the Wyss Institute and the National Science Foundation.
sonofsoil17, that's an interesting idea about using energy harvesting for RoboBee instead of onboard power storage. I'm pretty sure electrical engineers are already on this research team and they may be working on that idea already.
Chuck, the flapping wing thing is insanely hard to do. I'm putting together another flying robot slideshow, and reading more about the R&D involved. It just doesn't happen quickly, no matter who's worked on it.
Cool mechanical feat! The tether is just a challange I think this group has yet to be addressed. You don't necessarily need an onboard rechargeable battery. If some electrical engineers get involved, you'll see things like harvesting radio signals and temperature changes to power capacitors or batteries and using the mechanical structure (maybe with modifications) for the communications and antenna, etc. Now if we can just get this mechanical swarm flying and design it to zap mosquitos near my backyard deck!
I agree with Al that 10 years is a long time in the making but they are impressive-looking robots! The tethering at this point is a bit cumbersome, I suppose, but as you point out, Ann, it's quite complex to design these type of robots, so it's still quite an accomplishment. And they just look really cool.
For some reason, this reminds me of the Kracker Jackers in The Hunger Games. Those damn things were venomous. Coming back to the topic, this is certainly an impressive feat. And now that I think of it, these little guys will help immensely in exploration by getting through hard-to-reach places.
Cool story, Ann. I'm amazed by the flapping wing concept. The dynamics of this appear to be much different than the graceful flapping of Festo's SmartBird. Has anyone else used this concept in larger sizes?
They may have just solved the problem with the bees disappearing (or returning to their home world). We just need enough operators to go into the fields and pollinate all the flowers with these little flappy things. The honey might taste a little oily. Think of the employment possibilities, at less than 30 hours a week, of course- thank you Mr. President.
All that aside, I can only imagine what it took to get this far. If they could just lose the tether.
With major product releases coming from big names like Sony, Microsoft, and Samsung, and big investments by companies like Facebook, 2015 could be the year that virtual reality (VR) and augmented reality (AR) finally pop. Here's take a look back at some of the technologies that got us here (for better and worse).
Good engineering designs are those that work in the real world; bad designs are those that don’t. If we agree to set our egos aside and let the real world be our guide, we can resolve nearly any disagreement.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.