Engineers at Virginia Tech have built a jellyfish robot prototype the size of an adult man they say will one day patrol the seas to monitor environmental conditions and ocean currents, study aquatic life, make maps of the ocean's floors, and perform military surveillance.
The robot, named Cyro, is the big brother of an earlier robot jellyfish prototype, RoboJelly, designed by the same team of engineers. RoboJelly is much smaller, about the size of an adult man's hand; can propel itself through water; and can also refuel itself. That robot was designed primarily for military surveillance, and contains sensors, communications, and propulsion devices. Both robots are funded by the Office of Naval Research and the US Naval Undersea Warfare Center as part of a larger project to develop autonomous naval robots.
Meet Cyro, a man-size robotic jellyfish developed by engineers at Virginia Tech. (Source: Virginia Tech)
Cyro weighs 170 pounds and is 5 ft 7 inches long. It's much larger than the first-generation jellyfish because a bigger robot vehicle can carry a bigger payload, and can last longer in the water since it's more energy efficient. Energy efficiency is also one of the main reasons jellyfish were chosen as a biological model for the robot, since their lower metabolic rate lets them consume less energy than other aquatic animals. Another major reason is the fact that they can withstand a wide range of temperatures.
Although RoboJelly is tethered, Cyro is autonomous, and operates on a rechargeable nickel metal hydride battery. The team is also experimenting with hydrogen power sources. The robots must be able to last for months at a time unattended. Its multiple sensors make it possible to gather and store data while at the same time analyzing and transmitting previously stored data.
You can watch a video showing Cyro's moves below. In the video, Alex Villanueva, a doctoral candidate in mechanical engineering and member of the research team, explains that a major part of the R&D task right now is to understand and replicate the jellyfish's propulsion mechanisms. Cyro's eight mechanical arms are controlled by linear actuators, in the form of DC motors, in turn controlled by electronics. The electronics are contained in a bowl-shaped device inside the mechanical arm apparatus, and those are covered by a jelly-like shell made of silicone.
The Virginia Tech research team is headed by Shashank Priya, professor of mechanical engineering. Other universities involved in the larger Navy-funded project include Providence College, Stanford University, the University of California Los Angeles, and the University of Texas at Dallas.
I found the jellyfish's movements in the Cyro video to be scarily realistic. This robot also reminded me of the AquaJelly, designed by Festo. As seen in this video, AquaJelly's movements, as is typical of Festo's designs, are elegant. Yet they also seemed less realistic than Cyro's. AquaJelly, also autonomous, was designed to be group of swarming robots. Each one operates on an electric motor and two lithium-ion polymer batteries. These are housed in a central unit, a water-tight laser-sintered body that also contains the recharging control unit and the servo motors for the swash plate. On top of this unit is mounted a translucent hemispherical dome containing a control board and sensors. The robot's eight tentacles are attached to the dome.
Cabe, so you mean the basic physics definition. I still think that the usefulness of the robot's motion in the particular application is just as important as the physics in the abstract. This has become especially clear as I've been working on a nautical robots slideshow, where designs can be wildly different depending on end-usage--or wildly different to achieve the same basic purposes.
CLMcDade, I agree about the project being inspiring as well as the article. The field of Biomimicry has no boundaries and limits to creating magnificent machines. I'm really impressed with the waterproof material protecting the electronics and the graceful movement of Cyro's legs. Nice work as usual Ann!
Cabe, "most efficient" defined how? I've written about several different swimming robots, modeled after tuna, sea turtles and jellyfish. Each of these was described as highly efficient and/or with an optimum size or function(s) for the tasks it was designed for--and they weren't all the same set of tasks. Most robotics R&D is past the stage of fundamental research and is now applied to a specific end-use. OTOH, there are also some competing designs for similar uses.
Clinton, thanks for your comments (and for using the correct plural of a Greek word: nemesis, pl. nemeses). You bring up an interesting point that some other commenters have mentioned: what about predators thinking that a realistic robot is potential food? This jellyfish is bigger than most, if not all, sea turtles, but a killer shark could be a problem.
What a great piece of engineering, it certainly mimicks a real jellyfish in motion. My question is about directional control and how does it steer, which are not so very obvious. But I can see that it could run for quite a while, since it does not need to run to stay afloat.
According to a study by the National Institute of Standards and Technology, one of the factors in the collapse of the original World Trade Center towers on Sept. 11, 2001, was the reduction in the yield strength of the steel reinforcement as a result of the high temperatures of the fire and the loss of thermal insulation.
Robots are getting more agile and automation systems are becoming more complex. Yet the most impressive development in robotics and automation is increased intelligence. Machines in automation are increasingly able to analyze huge amounts of data. They are often able to see, speak, even imitate patterns of human thinking. Researchers at European Automation
call this deep learning.
The promise of the Internet of Things (IoT) is that devices, gadgets, and appliances we use every day will be able to communicate with one another. This potential is not limited to household items or smartphones, but also things we find in our yard and garden, as evidenced by a recent challenge from the element14 design community.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.