Researchers at the University of Colorado at Boulder are developing small, swarming robots -- dubbed by the team as "droplets" -- that will be able to accomplish a variety of tasks. Possible uses include building a space station or a satellite, self-assembling into a piece of hardware after being launched into space, or cleaning up an oil spill on Earth.
Swarm robotics is a fast-changing, quickly growing area of robotics research and development. We've reported on a swarm of "hedgehog" robots being developed by Stanford University to explore space, and swarms that can play Beethoven, or repair coral reefs. We've also reported on the robotic self-assembling pebbles developed in Daniela Rus' Distributed Robotics Laboratory at MIT, where the leader of the University of Colorado team, Assistant Professor of Computer Science Nikolaus Correll, did post-doc work.
Swarming robots, or droplets, developed by the University of Colorado, Boulder, may someday assemble telescopes and satellites in space. (Source: University of Colorado, Boulder)
The University of Colorado team has built a swarm 20 strong. The droplets form a "liquid that thinks" when they swarm together, said Correll in a press release. He plans to use the swarm of robots to demonstrate pattern recognition, sensor-based motion, and adaptive shape change, as examples of swarm-intelligent and self-assembly behaviors. These behaviors could then be transferred to much larger swarms that could carry out more complex tasks in water- or air-based environments.
The computer science research team also includes research associate Dustin Reishus and professional research assistant Nick Farrow. Together, the team has designed a basic robotic building block.
The platform will eventually be reproduced in large quantities for developing increasingly complex systems. Correll hopes to create a design methodology that will allow the swarm of robots to work as an aggregate in more complex behaviors. These might include assembling parts of an aircraft or a large space telescope.
In a video that describes the team's research (watch it below), Reishus says 10 of the droplets are now working and some of the software is written, but the robots aren't solving any useful tasks yet. "We are still just testing each individual robot, getting the very low-level communication between two robots working."
Reishus says that, after the droplets are completed, the team will have a platform that can be used for conducting various experiments with swarm robotics, whatever those might be.
Those experiments will probably be thought up by students working in a lab Correll has set up. There, students can use basic, inexpensive tools to explore and develop new applications for the robots. He expects that this will help accelerate the pace of development. The lab's research focuses on intelligent distributed systems, including sensing, actuation, computation and communication.
Aside from robotic swarms, researchers are working on large-scale, outdoor robot teams and smart materials.
Thanks, William. I knew people working on AI back in the early 70s and again in the 90s and 00s. Trying to make computers work like we do in terms of logical processes is still a far cry from also giving them sentience and self-awareness. But no, I don't relish the thought of a toaster or a fridge with a 'tude. My computer already seems to have that problem :)
BUT, in the public domain there have been references to some university people working towards artificial intelligence, and they have included self awareness as one means of moving toward human type judgement. My advice would remain, to "Think very carefully about the ultimate effects of your creations", because sometimes the machine does not stop just because you push the stop button.
Since people are rather less predictable than computers and robots, conside the problems that we could have if those in-animate things became a lot less predictable. What if your washing machine developed an "attitude problem", rather than just a component failure?
William, you've posted this basic comment/idea so often that I'm starting to think you know something about AI that the rest of us don't. The last time I looked, they were nowhere near achieving the kind of thing you're suggesting. Can you tell us any specifics of who's doing self-awareness research on the cutting edge right now?
Ann, Of course self awareness is not what these researchers are aiming for , but others are seeking to make the robots "Real", using artificial inteligence. My concern is that the AI group will create something that leads to self awarenesss, and shortly after that we will al be in trouble. Just considerthe problem of being in a cloud of rbots small enough to inhale accidentaly, and being allergic to their case materials.
Cabe, great visualization & metaphor. I wonder, though, if they're too small to deal with space junk. NASA is working on a different robotic system for that, which we covered here: http://www.designnews.com/author.asp?section_id=1386&doc_id=249134
The satlets' size is not given, but I'd guess it's a bit bigger than these droplets.
William, your comment on self-awareness is interesting, but I think it's important to remember that self-assembly occurs throughout nature without necessarily implying an accompanying sentience.
William, the researchers mentioned primarily assembly, not repair. The repair mentioned in the article was done by larger robots, and on coral reefs, which takes very little strength: picking up and placing very small pieces of coral. And swarms of small robots have worked together to assemble structures both large and small: http://www.youtube.com/watch?v=W18Z3UnnS_0 http://www.idsc.ethz.ch/Research_DAndrea/Archives/Flying_Machine_Enabled_Construction
All good questions, Cabe. I'm sure we'll learn more if/when the space application ever emerges. So far, it's one of several the research team envisions, not an actual project in progress.
I am wondering just what sort of repairs such small robots could be called on to do. Strength usually comes with size, and even working in concert, these would still be a collection of "small". An area of far greater concern would be if a "collective intelligence" should become self aware. That could lead to a number of unanticipated outcomes.
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Two new introductions in the world of motion drives for automation are moving toward use of standard Ethernet communications, eliminating the use of custom hardware.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
3 
