A Dutch company aims to change the way low-power electronics are designed by creating a separate component for power management to reduce the need for battery power in wireless sensor networks and other applications.
Anagear, based in Rosmalen, The Netherlands, recently came out of stealth mode with its first family of ultra-low-power circuits and a developer kit aimed at providing OEMs and electronics designers with a different way to manage the power in small devices that will save more energy than current methods, said Guus Dhaeze, vice president of sales and marketing for Anagear. "In applications like wireless sensor networks, a lot of those devices are not active all the time -- they are in active standby mode in order to save power," he told Design News.
Generally, the system's microcontroller manages this standby mode, but because of the leakage current in this type of design, "they are not the best products to do this management of power consumption in a device," Dhaeze said.
Anagear’s ultra-low-power circuits are aimed at separating power management in low-power devices from the microcontroller in order to reduce the need for battery power and make way for alternative energy sources, such as solar power. (Source: Anagear)
Enter Anagear's ANG line of analog circuits, which aim to take power management out of the controller and provide a more efficient way to provide a standby mode for small devices.
Anagear's ICs achieve this in three key ways. First, the circuits take over complete control of the power-management system and switch off every other component that is not needed in standby mode. "Even the microcontroller is switched off," he said. The circuits utilize voltage scaling to convert the power of external components to the system to the bare minimum. "If you attach a microcontroller at 1.2 volts, we can deliver at that level. The circuit doesn't consume more."
During standby mode even when the microcontroller is not active, the Anagear circuit can autonomously monitor critical system voltages, such as how much energy is left in the battery and what the internal temperature of the system is. "As long as those signals remain within certain limits, there is no need to alarm the system and wake up the microcontroller," Dhaeze said.
ANG currently has three circuits in its line. The premium offering, the ANG1010 integrated circuit (IC), includes power management and supervisory controller for battery- or photovoltaic-powered systems. This circuit can plug into an indoor solar panel to offer an alternative power source to a battery. "People can connect a small solar panel for indoor use directly to our chip and we harvest the energy, storing it from the solar panel into a hydrorecharageable battery or supercapicitor," Dhaeze said.
Very true, so many designs simply need to wake up every second or so to make a measurement and that clock circuitry usually takes a few microamps. Microcontroller vendors have gotten better at providing a low current wake-up but aren't really there yet.
ZiLOG has a pretty nice watchdog circuit in their Encore parts that can do it with less than a microamp.
It definitely seems like Anagear is on to something here with its preservation of power it manages by taking power management out of the microcontroller. It seems a fairly simplistic idea and will be interesting to see if this takes off. I wonder if designers might balk at making this change to the time-worn design.
Not if meets the right balance of cost and performance. If it adds too much cost to the BOM then only the designs trying to squeeze every last nanowatt will want the part. On the other hand, if they get the part under a dime in volume then I can use a cheaper, power guzzling micro and spend the dime on their part. It's another performance/cost trade off.
This reminds me of the solar powered calculators used in school. No one hails those as the alternative energy shining examples they were.
Something around 90% of all energy created is lose in various ways. Friction, heat, etc.. It is good companies are attempted to recover some of that. In the distant future, we will wish the past had.
The distant future will feature mining landfills, I am sure of it. The precious lithium will get recovered at all costs. Not to mention all the metals recovered there too. A century of building these landfills have created mountains, as you can see in some cities. Inside it is a television from the 1950s, packed with all sorts of precious metals. It waits for someone to recover in the future.
i remember those, Cabe...what a simple concept, and I wonder now why it took so long for solar power to catch on. I guess people are now starting to learn from the past but I agree, I think this type of harvesting could have been started years ago and been further along in its progression by now.
Common human behavior, do something wrong until it is too late. Take the Tasmanian Tiger, exterminated. American buffalo. Enron. The list goes on and on.
Luckily, the garbage will still be there. Time to start mining.
If I recall, there was a Japanese firm that developed a way to harvest the precious metals out of electrical waste... I will have to look into this.
Harevesting, recycling, reusing...these are all the ways forward now before we use up everything we have and are FORCED to do it. I think my parents instilled in me value for things even though I don't care about having lots of them in general. I was always the type of person who would use something even if it was falling apart...until it absolutely broke. And even then I would try to fix it. The idea of use once and throwaway has become way too commonplace. Harvesting and recycling what we can to turn it into something else--whether it be metal, plastic or what have you--is the best thing we can do to promote a healthier planet. It also makes sense financially if you can get the numbers right.
The "Johnson family of California" recycles and preserves everything to a point where they throw away only a few handfuls of trash a year. They are not the only ones either. It can be done. But to be honest, their lifestyle is not that appealing.
I read this a feel pretty awful for all the garbage I tossed out recently.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New disc magnet motors fit into the design trend of stepping up to closed loop performance while maintaining the cost advantage of stepper motor technology.
At the Design News webinar on June 27, learn all about aluminum extrusion: designing the right shape so it costs the least, is simplest to manufacture, and best fits the application's structural requirements.
A new battery design, which replaces lithium with abundant and low-cost elemental sulfur, is still in its nascent stages but shows real promise for giving batteries more energy potential.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
2 
