The high cost of sending an engineer or skilled technician onsite to solve machinery problems is putting the focus on new ways to achieve higher levels of remote access support. Now, a service called Virtual Support Engineer is targeting machinery builder's OEMs to provide a way for securely connecting to machinery, improving troubleshooting and optimizing system performance.
Using the Virtual Support Engineer service, OEMs access their assets in a highly secure environment. While most other user solutions on the market transfer data bi-directionally through a firewall, the service relies exclusively on IT-approved outbound communication. This helps prevent computer viruses, worms, or other digital threats tied to inbound data transfer. Security is further enhanced by adding features such as recorded logins, thorough audit trails, video recording, and the ability for the end user to be given the rights to grant access on demand.
Using Virtual Support Engineer, OEMs access their assets in a highly secure environment exclusively using IT-approved outbound communication. (Source: Rockwell Automation)
Craig Resnick, vice president of consulting at ARC Advisory Group, said in a press release:
For OEMs, remote access to information generated by machines provides significant opportunity to improve service, but the potential benefits actually extend much farther. The ability to access and analyze machine data ultimately will help OEMs build more efficient and effective machines for their customers.
In the past, a main obstacle to receiving remote access has always been security concerns from end users. The Virtual Support Engineer service helps to relieve uncertainties when it comes to security by providing a more highly secure solution that is also more cost-effective for OEMs of all sizes.
OEMs using the Virtual Support Engineer service receive access to real-time alarming capabilities that can be delivered via text message or email, to themselves, their customer, or a Rockwell Automation remote-support application engineer. Through the system, OEMs use a simple graphical interface to configure alarms for key tags and performance indicators, allowing for quick response to issues and proactive prevention. Alarm capabilities also can indicate potential for future equipment failures, allowing OEMs to make proactive adjustments prior to catastrophic failure -- all without travelling onsite to their customer's facility. Access to machinery alarm data and analytics information also can help inform future performance enhancements to machinery.
In emergency situations, the Virtual Support Engineer service proactively notifies OEMs when equipment goes down. The system sends a constant signal to the Rockwell Automation Service Center indicating a machine's online status. If this connection is lost, Rockwell Automation immediately notifies the appropriate party, who can then troubleshoot the issue from anywhere.
Yes, I agree with Glenn, although I think a solution like this can be helpful in some situations. But sometimes there is no replacement for a live person who can quickly assess the situation and get the job done quickly and correctly.
I have done telephone support for industrial machines, and sometimes a technician has to be on-site to diagnose the problem. Many times I have diagnosed a problem on-site because the operator couldn't properly describe the problem on a telephone call. To reduce downtime, the first choice is to try to fix the machine remotely through a telephone call.
This is a great application of secure connections to help with production problems. As a practice, my company does not run external communications to our machinery due to security concerns. These highly secure connections would help to sway our IT department. We had a recent application that required error monitoring on a new piece of machinery, but we needed to have the supplier stay at our facility and send information back to their headquarters via e-mail. This system got the job done, but it was inefficient. If the supplier could continually monitor the machine, they could have had better real time data and supplied us with a solution quicker.
Interesting concept, Al. I'm curious, though: Is diagnostic ability limited as a result of the outbound-only communication set-up? Seems like bi-directional communication would be an important of a system like this one.
Thanks for the quick reply, Al. I come from that PS/2 generation of technology fans that projected virtual reality and flying cars by 2001. I still find it difficult to integrate reality into my musings of a connected future. Maybe we are getting there, albeit, slowly. I agree that remote diagnosis is an awesome ability. Perhaps remote machine diagnosis is following the trends in remote diagnosis for humans.
William, I can attest from first hand experience working for an automation supplier that cost, but also the speed of dealing and resolving problems, has been driving the move to remote support for easily more than 10 years. The ability of a skilled engineer or technician to immediately logon and review code in a control system is a huge benefit. For machinery builders, it definitely reduces support costs and enables (for the hardest problems) to have key engineering staff to review the app versus sending someone on the road.
Al and naperlou, I wonder if it is possible to quantify how much of this movement to remote monitoring is being spurred by high cost and how much is the natural result of automation. I appreciate that there are lots of security issues and even more OEMs involved, but hasn't this capability existed since the early 1990's with the founding of ODVA.org? Perhaps there is a confluence of higher cost and lower resistance to change that is enabling this now, 20+ years after it was technologically feasible to do so. One generation later in human terms, 13+ generations in Moore's terms...
Al, this is an interesting application, and a good solution to a major concern. It makes no sense to have an engineer outside of the facility controlling machines inside the facility. On the other hand, there is a lot one can discern about a system with a steady stream of telemetry. In addition, as mentioned, the smart controllers can generate alerts so that support engineers can assess the health of the system. All in all a good thing. This was, of course, done in the computer industry, primairly in mainframes, many years ago. Those were "smart" systems, so it was natural to do it.
We looked at a number of sources to determine this year's greenest cars, from KBB to automotive trade magazines to environmental organizations. These 14 cars emerged as being great at either stretching fuel or reducing carbon footprint.
Researchers at MIT and Sandia National Labs have observed a reaction in lithium-air batteries that could help improve the design of these cells for electric vehicles and other applications.
Healthcare might seem to be an unlikely target application for the Internet of Things technology, but recent developments show small ways that big-data is going to make an impact on patient care moving into the future.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
1 
