Medical robots are highly talented machines. They can help diagnose diseases by working inside a patient's body. They can mix up the right compounds for chemotherapy, and they can serve as remote avatars for patients' relatives and doctors. Some of them are helping paralyzed people walk. Others are teaching stroke victims to move their arms and legs again.
Other medical robots are helping surgeons perform a wide variety of tasks, from brain surgery and heart surgery to less invasive procedures such as knee resurfacing.
Click on the image below to see 11 robots making breakthroughs in the medical industry.
MAKO Surgical's RIO Robotic Arm Interactive Orthopedic System is designed to help surgeons during knee resurfacing, a minimally invasive but difficult operation done before placing implants, an alternative to more extensive and invasive total knee replacement. Knee resurfacing retains healthy bone and tissue, preserves the ligaments, and speeds recovery time. The RIO Robotic Arm provides real-time, interoperative visual, tactile, and auditory feedback, fostering more precise positioning of implants. (Source: MAKO Surgical)
Rick, thanks for sharing your wife's experience. We keep hearing that robotic-assisted surgery helps speed accuracy and healing--DN has covered the daVinci system several times--but it's hard to know how much of that's hype or reality.
A few months ago, my wife had internal surgery with the surgeon using the da Vinci Surgical System. Instead of one week in the hospital to recover, she was out in one day...in fact she was in no post-op pain by the time she left the hospital.
Of course when the doctor told us in advance that the da Vinci Surgical System would be used, we investigated. The cost of the machine is about $1.5 million each, and made in California.
Read and watch the videos to find out more about the robotic surgical system.
da Vinci Surgical System website: http://www.mivipdavinci.com/da-vinci-si-surgical-system.html?utm_source=google&utm_medium=cpc&utm_term=da-vinci-surgical-system-phrase&utm_campaign=mivip-da-vinci-los-angeles-ca-gst&_vsrefdom=p.3499
GTOlover, I totally agree. There's a place for humans and a place for robots, and I'm not at all sure the twain should ever meet when it comes to surgical procedures.
Ann, as of now robotic assisted procedures are widely accepted in most of the super specialty hospitals. But when it comes for a fully robotic done procedure without a human (Doctor) intervention, peoples may get little bit sacred about it (mindset). Eventhough error chances are less in procedure done by robotics; people always have a fear to opt for that.
I have really mixed feelings about independent robotic surgeons. The creepy/scary factor is pretty high (maybe we've all watched too many horror movies...). But I think Cabe and Mydesign are right.
What robotics has done for the medical industry in unprecedented. When I saw a medical robot alter someone's eye to correct the vision without human interaction, I was blow away. And that was almost 8 years ago. The da'vinci robot is another example, aiding doctors to be more precise and controlled. Shakey hands are a worry of the past. Watch some of the da'vinvi robot videos on youtube, and you will agree. More robots are needed.
Ann, you are right. As of now robots are assisting the surgeons and nurses for carrying out certain task in surgical room and they won't capable to handle any task independently. But no doubt, in future they can with little bit of analytical and fuzzy logic.
Morris, what a terrifying thought--but it also gave me a laugh. Let's hope it's not Windows... We've written about the da Vinci system several times on the DN site, including our earlier medical robot slideshow: http://www.designnews.com/author.asp?section_id=1386&doc_id=240513
The unsettling thought comes when you want to ask your surgeon what operating system the robot uses, but then you decline to ask, realizing you really don't want to know.
The da Vinci Surgical System fits into the category of machines featured in the slideshow, and has numerous advantages over conventional surgery.
Marketing@Farm, thanks for the input from people working to productize some of this amazing technology and develop it further. Your company's work on the MAKO robotic arm looks especially interesting.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New disc magnet motors fit into the design trend of stepping up to closed loop performance while maintaining the cost advantage of stepper motor technology.
At the Design News webinar on June 27, learn all about aluminum extrusion: designing the right shape so it costs the least, is simplest to manufacture, and best fits the application's structural requirements.
A new battery design, which replaces lithium with abundant and low-cost elemental sulfur, is still in its nascent stages but shows real promise for giving batteries more energy potential.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
2 
