Ever wondered what your nightly tossing, turning, and snoring would look like if turned into art by a robot? Now you can find out, by winning the chance to stay at a hotel belonging to European chain Ibis, where an ABB robot paints your sleep patterns.
As part of the hotel's "Sleep Art" advertising campaign, ABB's smallest robot, the IRB 120, will paint patterns inspired by the dreams of 25 people. By sleeping on a specially designed mattress in an Ibis-owned Paris, Berlin, or London hotel, participants' dreams will be conveyed to the robot via 80 motion, sound, and temperature sensors in the mattress' topper.
Winners of a chance to stay at a European hotel chain will leave the next morning with a brand new piece of art, based on their sleep pattern data, which will be captured by sensors and painted by this ABB robot. (Source: ABB)
"The topper is built with a grid of force sensing resistors (FSRs), which detect exactly where and how the person is lying," ABB France spokesman Guillaume Pradels wrote in an email to Design News. "Over time, this obviously translates to motion as well."
The sensor grid is connected to the "Dreambox," which collects detailed information on each individual FSR. Along with the room's temperature and sound levels, also captured by the Dreambox, this data is then streamed by a WiFi link to a computer that controls the art production.
The software running on the computer, and the Dreambox hardware, was made by ACNE Production, the Swedish production company overseeing the project. After receiving the sensor data, the computer parses it into an algorithm and sends the sleeper's positions to the IRB 120.
ABB wrote software that collects the data from the Dreambox and allows the robot to capture sleep patterns, process the data, and turn it into a personalized visualization. ABB also wrote software that talks to the IRB 120's controller interface using a TCP socket via the IP protocol over Ethernet. After the IRB 120 gets the data from the computer, ABB's robot path algorithm calculates the correct path by applying the relevant orientation on the brush, avoiding collision, and other out-of-reach or singularity problems.
Proprietary smart path computation assures the robot's delicate and smooth movements. So does the fact that the robot path is speed-independent, due to ABB's proprietary QuickMove and TrueMove technology. The result is a series of multi-colored brushstrokes applied to a canvas in a rendering of the data that becomes a unique acrylic painting.
In its normal everyday life, the IRB 120 is used mostly in the 3C (computing, communication, and consumer) industry for handling parts, dispensing, and machine tending. It was chosen for the Sleep Art project for several reasons. Both the manipulator and the controller, which each weigh 25 kg (55.1 lb), are small in size and weight, so it's relatively easy to handle. The robot also has 0.01mm top-of-class repeatability, as well as top-of-class accuracy.
Robotic hands have been developed for a variety of tasks that require a delicate touch, such as disarming improvised explosive devices (IEDs), or performing brain surgery. But these do not usually depend on industrial roots for emulating humans' fine motor movements.
Although digitally streaming computed data to an industrial robot is not new, the robot path algorithm developed for this application is unique, said Pradels. ABB hasn't decided yet what other applications the algorithm might be used for. One possibility might be digital fabrication in construction, which has already been explored by architects Gramazio & Kohler using ABB's IRB 4600 robot.
Cabe, yes it would be interesting to see how the sensor data is converter to robot movement. Since the data is coming from body movement, it may not distinguish between pleasant dreams and unpleasant dreams unless the dream affected body movement.
Robert, I agree. Ann this is a nice article.The idea of using FSR data to control a robot is pretty cool. I discussed FSR's and motion control in my book, Learn Electronics with Arduino and can see the technique in operating a robot being implemented in this application. I'm wondering what's the room rate for this techno-art experience?
It is an interpretation of the data, so how was the software designed? It would be interesting to see how the data is handled. I will admit, I'd like my dreams to be interpreted. I would like to see a nightmare vs. a typical one.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New disc magnet motors fit into the design trend of stepping up to closed loop performance while maintaining the cost advantage of stepper motor technology.
At the Design News webinar on June 27, learn all about aluminum extrusion: designing the right shape so it costs the least, is simplest to manufacture, and best fits the application's structural requirements.
A new battery design, which replaces lithium with abundant and low-cost elemental sulfur, is still in its nascent stages but shows real promise for giving batteries more energy potential.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
2 
