HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Blogs
Blog

My Opinion on IEC 61508: It Puts Safety First

NO RATINGS
View Comments: Oldest First|Newest First|Threaded View
naperlou
User Rank
Blogger
Software safety key
naperlou   11/6/2012 10:25:48 AM
NO RATINGS
Rich, I sympathize  with you as far as the kids go.  It is tough. 

As far as safety, it is imperative in many of the systems we interact with in these times.  If safety is not built in, people will not trust them.  Fortunately we have standards like IEC 61508.  In aerospace, you have similar standard, like DO-254.  The safety record of those systems is very good. 

William K.
User Rank
Platinum
IEC 61508
William K.   11/7/2012 8:54:52 PM
NO RATINGS
What the write-up does not include is just what sort of products the standard applies to. For our products it would seem that writing the control code so that any deviation from the correct sequence of actions stops everything may already be in compliance. That type of programming did not make any distinction between deviations that were unsafe and those that had no safety impact at all. Any deviation was a show-stopper.

But then I have also seen other safety rules, mostly hardware,  that seem to be aimed at drunks bent on self-destruction. Perhaps those standards should be revisited now.

Partner Zone
More Blogs
Researchers in the United Kingdom have found a sustainable way to derive hydrogen from grass to develop biofuel.
Without failure and loss, there is no success. Sadly, some failures and losses are greater than others. That’s certainly true of engineer and Space Race astronaut Gus Grissom.
Researchers in China have developed a new material that mimics coral that could help remove toxic heavy metals like mercury from the ocean.
The popularity of Pokemon Go may be break open a new rush of augmented reality products.
Engineers in Australia have discovered a mechanism that could allow for the design of new composite materials for light harvesting and optoelectronics.
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Jul 11 - 15, Embedded System Design Techniques™ - Debugging Real-time Embedded Software – Hands on
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7 | 8 | 9 | 10


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Technology Marketplace

Copyright © 2016 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service