Make way for MABEL, a new humanoid robot developed by university researchers that can walk and climb stairs like humans but which they claim is even more physically agile and energy efficient than its predecessor, Petman.
MABEL was developed by researchers from Oregon State University (OSU) and the University of Michigan, who took their cues from human locomotion to create a walking and running robot with a spring in its step -- literally, OSU assistant professor Jonathan Hurst, who led the robot’s mechanical design, said in an interview with Design News. Professor Jessy Grizzle at Michigan was in charge of MABEL’s control engineering.
“There are great big springs [in the robot’s leg joints] made of the fiberglass material used in an archery bow,” Hurst told us. “That nice big spring allows it to absorb energy and bounce on it… just like [human] tendons.”
Professor Jonathan Hurst, right, tinkers with MABEL, a humanoid robot that has a natural human gait. MABEL can walk, run, and climb stairs using a natural spring in its joints. (Source: Oregon State University)
Funded in part by a $4.7 million research grant from the Defense Advanced Research Projects Agency (DARPA) -- the same backers of Boston Dynamics' Petman robot, which also can run and walk up and down stairs -- MABEL runs on a lithium polymer battery rather than a gasoline-powered engine, like Petman. The National Science Foundation also financially backed the project.
In addition to this focus on energy efficiency, MABEL’s designers -- who recently won a 2012 World-Changing Innovation award from Popular Mechanics for the robot -- also made a concerted effort to create MABEL with a “human-like or animal-like gait that is just as agile but takes less energy to get around."
“It really looks human-like,” Hurst says. “It if walks up steps and stumbles, it then steps up again… It really looks like a person climbing stairs.” He told us one of the keys to this motion is that MABEL, like humans, is constantly performing a balancing act as it moves, making its movements appear more natural.
Powered by an offboard computer and energy source, MABEL will soon have a next-generation companion, ATRIAS, which will bring its artificial intelligence and power source onboard, Hurst told us. This will allow ATRIAS to “walk around outside,” as well as step sideways, something MABEL can’t do. It also will include more powerful motors yet be lighter than MABEL.
Hurst said he and his team are building three identical copies of ATRIAS that will be distributed among OSU, Michigan, and Carnegie Mellon University as part of ongoing research to create robots that move as naturally as humans do. He foresees a number of applications for this research, including the development of exoskeletons and robots to help people suffering from paralysis to walk, something companies like Ekso Bionics are doing.
Creating robots with a natural spring in their joints also will lend itself to future development of prosthetic limbs that give amputees a more natural gait and range of motion, as well as the ability to dynamically adjust their step. Additionally, the research is conducive to the creation of humanoid robots that can be used in disaster scenarios, such as those being designed as part of DARPA’s Robotics Challenge, Hurst said.
“Just having robots in the environment -- what we’re doing is very related,” he said, comparing it to the human movement of climbing a ladder, something that might be needed in a disaster-response scenario. “Once we can understand how that control works -- and we’ve just demonstrated that -- then people can be building systems that are better every year.”
Very nice and interesting article. I always enjoy reading the robot stories. This one is really interesting kind of makes me think irobot. Before me know it will be hard to tell a robot from a real human. I'm planning on working on my PhD and my thesis idea is based on one of the mimicking robots.
Hi Ann, Your quite welcome about the link. I find the subject of robotics to be fascinating and it has no application boundaries. The articles you write definitely illustrates that! Keep them coming!!!
I agree with both you and Charles about robotics research not under Military eyes. Occassionally its nice to see robotics being used in a non destructive capacity. Also, here's a link on Oregon State University Robotics Lab. Keep the robotics articles coming. I really enjoy them.
Great point about the effect of the research on the design of prosthetic limbs. Wearers of prostheses often have to deal with a very unnatural gait that's caused by their prosthetic legs. Many take a step and then swing the prostheses, which is said to be terribly uncomfortable for them. If an engineer could design a limb that provides a natural gait, that would be huge step forward.
We looked at a number of sources to determine this year's greenest cars, from KBB to automotive trade magazines to environmental organizations. These 14 cars emerged as being great at either stretching fuel or reducing carbon footprint.
Researchers at MIT and Sandia National Labs have observed a reaction in lithium-air batteries that could help improve the design of these cells for electric vehicles and other applications.
Healthcare might seem to be an unlikely target application for the Internet of Things technology, but recent developments show small ways that big-data is going to make an impact on patient care moving into the future.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
3 
