HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Blogs
Blog

Interfacing Intelligent Sensors With Industrial Ethernet Networks

NO RATINGS
View Comments: Threaded|Newest First|Oldest First
Helge Hornis
User Rank
Iron
IO-Link ... a possible solution for "the last foot"
Helge Hornis   10/17/2012 9:30:12 AM
NO RATINGS
It is important to clearly separate IO-Link and whatever Ethernet based protocol a user might select.  While IO-Link adds functionality and diagnostics capability to an "end device" it is still, as was pointed out, a parallel wiring technology and does therefor not simplify installations using Ethernet.  As was pointed out the overhead associated with Ethernet is significant.  This makes it necessary for Ethernet field I/O to have a relatively high I/O count; perhaps 16 or 32 I/O points per module.  IO-Link is not going to change that fact.  Considering applications in material handling or storage and retrieval such a high I/O count results in setting up an Ethernet network PLUS a significant parallel (i.e. hardwired) cabling to the sensors and actuators.  IO-Link or not, the extra material (cordsets, wiring duct ...) needed is still considerable.  In those cases a highly decentralized solutions like AS-Interface offers better functionality, faster installation, reduced material and ultimately lover cost.  And since AS-Interface makes use of a proven installation piercing technology adding low density I/O wherever necessary is possible. It should also be mentioned that AS-Interface does not replace Ethernet. On the contrary, users selecting any Ethernet solution will simply add the appropriate gateway and then collect field I/O through low density/ low cost I/O modules (some are as little as a book of matches.)  From the PLC's point of view a gateway is simply an Ethernet I/O module with hundreds of I/O points.   

apresher
User Rank
Blogger
Extension of Ethernet Network
apresher   10/17/2012 9:41:37 AM
NO RATINGS
Helge, Excellent discussion and analysis. The point is that these technologies can extend networking functionality at low cost the last foot, and provide a way to increase the intelligence of these devices without costs especially for setting parameters, configuration and diagnostics.  Thanks.

naperlou
User Rank
Blogger
Re: Extension of Ethernet Network
naperlou   10/17/2012 11:36:18 AM
NO RATINGS
apresher, the important thing is that Ethernet brings a lot of advantages to the industrial environment, while having a different structure than networking protocols that were designed for that environment.  The idea of a two tier approach, with another protocol handling the shorter distance, lower speed aspects of the last foot, is almost inevitable.  With the availability of standardized modules that interface these other bus technologies with Ethernet, a system can be created that easily handles modules with different protocols in the same system.  As long as the programmer can treat these as I/O points on the Ethernet network, then various suppliers can be used without unduly restricting the design.  This is the essence of the systems approach.

Charles Murray
User Rank
Blogger
Re: Extension of Ethernet Network
Charles Murray   10/17/2012 4:47:52 PM
NO RATINGS
Interesting article, Al. What's the history of IO-Link? Did this grow up in response to Industrial Ethernet, or did it exist in some other form previously?

Jack Rupert, PE
User Rank
Platinum
Re: Extension of Ethernet Network
Jack Rupert, PE   10/23/2012 2:26:41 PM
NO RATINGS
Chuck,  I think the idea was to have a standard type of communication topoology regardless of the bus structure.  Basically, it's due to the many different types of bus out there.

apresher
User Rank
Blogger
Extension of Ethernet Network
apresher   10/23/2012 5:52:41 PM
NO RATINGS
Chuck, I am not sure about the development history of IO-Link. Clearly it was motivated by the need for an inexpensive way to easily set dconfiguration parameters, monitor systems and do troubleshooting of inexpensive devices linked to a fieldbus network.  Automation suppliers have widely embraced it for all of those reasons.  The overhead and expense of adding Ethernet to these simpler devices, such as sensors, plus the openness of the technology has also played a key role in its gaining support.  

Partner Zone
More Blogs
In this new Design News feature, "How it Works," were starting off by examining the inner workings of the electronic cigarette. While e-cigarettes seemed like a gimmick just two or three years ago, theyre catching fire -- so to speak. Sales topped $1 billion last year and are set to hit $10 billion by 2017. Cigarette companies are fighting back by buying up e-cigarette manufacturers.
Advertised as the "Most Powerful Tablet Under $100," the Kindle Fire HD 6 was too tempting for the team at iFixit to pass up. Join us to find out if inexpensive means cheap, irreparable, or just down right economical. It's teardown time!
The increased adoption of wireless technology for mission-critical applications has revved up the global market for dynamic electronic general purpose (GP) test equipment. As the link between cloud networks and devices -- smartphones, tablets, and notebooks -- results in more complex devices under test, the demand for radio frequency test equipment is starting to intensify.
Much of the research on lithium-ion batteries is focused on how to make the batteries charge more quickly and last longer than they currently do, work that would significantly improve the experience of mobile device users, as well EV and hybrid car drivers. Researchers in Singapore have come up with what seems like the best solution so far -- a battery that can recharge itself in mere minutes and has a potential lifespan of 20 years.
Some humanoid walking robots are also good at running, balancing, and coordinated movements in group settings. Several of our sports robots have won regional or worldwide acclaim in the RoboCup soccer World Cup, or FIRST Robotics competitions. Others include the world's first hockey-playing robot and a trash-talking Scrabble player.
Design News Webinar Series
10/7/2014 8:00 a.m. California / 11:00 a.m. New York
9/25/2014 11:00 a.m. California / 2:00 p.m. New York
9/10/2014 11:00 a.m. California / 2:00 p.m. New York
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 20 - 24, How to Design & Build an Embedded Web Server: An Embedded TCP/IP Tutorial
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: 10/28-10/30 11:00 AM
Sponsored by Stratasys
Next Class: 10/28-10/30 2:00 PM
Sponsored by Gates Corporation
Next Class: 11/11-11/13 2:00 PM
Sponsored by Littelfuse
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service