It's Friday, and let's face it, who couldn't use a drink? And if that drink is mixed by machine, all the better, I say.
Before you think I may have already had one too many and am talking a load of nonsense, I present to you… The Inebriator.
Powered by an Arduino Mega 2560 microprocessor project board, the Inebriator is designed to make it almost effortless to mix up perfect cocktails in seconds without the hassle of having to look up ingredients or carefully measure out spirits and mixers.
Click on the photo below to check it out.
The machine comes with a Hitachi HD44780 compatible display to display drink information and buttons to navigate the menu. The Inebriator also boasts a stepper motor to drive the drink shelf, with acceleration and deceleration to allow high speed without spilling, and a DC motor to operate the optics.
Nice use of tapping into the power of the Arduino platform. The addition of the RFID sensor to cut off those that partake too much is clever. I have to say, the Siri-driven margarita maker looks a little less cludgey and more appealing to me.
I don't drink alcohol but from what I've seen, the interaction between the bartender and guest is important. The skill needed to make a "good drink" or even get create something new and unique is appreciated. Perfection isn't required.
This looks cool but it's dry and impersonal. It's the equivalent of an automated sushi chef.
Agreed it defeats the point, Nadine. Plus after watching the video, all the different stops for different alcohol flavors coupled with the LED colored flashing lights gave it a rather manufactured feel, not to mention, giving me a slight hang over. Too much like the equvialent of fast food for cocktails. I'll stick with a cocktail made with hands-on professional attention. Maybe we could pair this machine with the Popinator!
NadineJ, I agree. The machine is very impersonal and I don't really see the point behind it. The entertainment behind it is loss by the robo-tech appearance. I'm an advocate for robots that perform tasks too dangerous for humans but making drinks for social events just doesn't seem right. Although the machine has no appeal to me, I agree with using the Arduino Mega2560 microcontroller platform in managing the Inebriator's extensive I/O.
I find few things more annoying than an automated phone attandant, but these days, nearly every company uses them instead of a human operator. If someone can find a way to eliminate the need for a human bartender and save money, this will become popular, too, unfortunately.
Chuck, while I'm not so sure this machine really beats the human bartender, there are some automated functions that have really earned their keep. I prefer the ATM to the inside-the-building teller. Paying a bill online or via an automated system on the phone beats mailing the coupon. And half the time I make a phone call, I prefer reaching voicemail. I can efficiently deliver my message and go.
This is a cool machine, but from the bartenders I've seen, this machine would be a tad slow. However, I'm sure this would be useful for tracking drinks, tracking supply consumption, and controlling portions.
I think the automated bartender would have it's niche, but I'll stick with the good old fashioned human for quickness and knowledge of mixology. This in no way takes away from the design and function of The Inebriater; great project, use of microcontrollers and other technologies.
Yes, it is a good display of technology, Notarboca. Even if this isn't a reasonable replacement for a bartender, it does show off technology that would be very useful in other automation and control settings.
I agree with Rob and mrdon: cool machine, but when you are talking spirits, there is no substitute for a human at the controls for alcohol. Not only is a good bartender fun to watch and to converse with, they can vary the amounts of alcohol to fit the customer and situation, and they are fast. What happens when the machine breaks and the bartender doesn't know how to make an Alabama Slammer? You don't want to know. :}
Maybe this machine needs a breathalizer attached, that would prevent you from getting drinks at all after a certain amount, or regulate the amount of alcohol in your drinks accordingly. Yea... then you could take all the fun out of going to a bar. This kind of device is indicative of our changing business landscape, that is... removing people from the equation so that someone can make more money than they deserve, and supply an inferior product.
I agree with the earlier comment that this machine was designed to display motion control technology and not meant to seriously replace a bartender. Though the machine is fun to watch, when compared to a bartender in a busy situation, it is really rather slow.
Interesting observations, ChasChas. here's one more observation courtesy of Homer Simpson... "Alcohol: the cause of, and solution to, all of life's problems."
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New disc magnet motors fit into the design trend of stepping up to closed loop performance while maintaining the cost advantage of stepper motor technology.
At the Design News webinar on June 27, learn all about aluminum extrusion: designing the right shape so it costs the least, is simplest to manufacture, and best fits the application's structural requirements.
A new battery design, which replaces lithium with abundant and low-cost elemental sulfur, is still in its nascent stages but shows real promise for giving batteries more energy potential.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
2 
