Some of today's robots (as we've told you before) are busy stalking sharks, cleaning floors, and harvesting crops, but others are busy making your lunch.
An idea hatched in 2006 by Cui Runquan, a Beijing chef, has spawned a new legion of robots to perform the mundane task of making noodles in restaurants -- an assembly-line repetitive activity that is tiring for human workers. The chef says his robots are cheaper for restaurant owners.
A roomful of the Chef Cui noodle-slicing robots invented by Cui Runquan to perform the arduous and repetitive task of slicing noodles in restaurants. The robots use movements similar to a windshield wiper to slice noodles rapidly with one hand from dough held in the other. (Source: Zoominuk)
Inspired by his experience at his own restaurant, Runquan invented the first version of the robots in 2007. Soon after that, he began the task of designing and producing them. The latest version of the machines -- dubbed the Chef Cui robots -- is the fourth version and has been in mass production since March. Each robot costs about $2,000, while one worker doing the same job would cost a restaurant owner about $4,700 a year, according to CNet.
The robots have multicolored torsos and heads and eyes that flash yellow lights. They use movements similar to a windshield wiper to shave noodles with one hand from dough held with the other. The noodles go into a pot of boiling water, and voila -- a new batch of Chinese noodles is ready.
"As there are more and more job opportunities, the young people don't want to work as a chef to slice noodles, because the job is very exhausting," Runquan says in the video that appears below. "It is the trend that robots will replace men in factories. It is certainly going to happen in sliced-noodle restaurants."
I saw an article last year that predicted that McDonalds will have unattended robotic resteraunts within a decade. Eventually robots and computers, which are already impacting employment, will be doing a lot more jobs than they do now. Those jobs will be gone forever. What will we do when our workforce becomes so large relative to the jobs available, that there is constant double digit unemployment?
Good point, Cadman-LT. I've always thought robots were machines that exhibit human qualities. Welders and other factory machines are often called robots partly (I think) because their movements replicate human tasks.
Hi Cadman-LT. I think the word robot is a widely used term that encompasses a wide range of machines. I haven't seen a clear definition between robot and machine.
So basically, when I think robot, I think of a human-looking machine. I don't think about robotic welders and whatever, I just picture a human-looking machine. There are a lot of machines that are not called robots, but when you make a machine look human, then they call it a robot. See what I mean?
I guess robots are made to look human and a machine is a machine. I know that isn't correct, because we have welding robots and such that don't look human. That's my answer though.
New disc magnet motors fit into the design trend of stepping up to closed loop performance while maintaining the cost advantage of stepper motor technology.
At the Design News webinar on June 27, learn all about aluminum extrusion: designing the right shape so it costs the least, is simplest to manufacture, and best fits the application's structural requirements.
A new battery design, which replaces lithium with abundant and low-cost elemental sulfur, is still in its nascent stages but shows real promise for giving batteries more energy potential.
The push to achieving more intelligent, integrated manufacturing is putting a strong focus on networking and connectivity as key enabling technologies.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
