We've reported on Roomba-like robots that mow your lawn. Now, one with a wide-angle camera for conducting under-vehicle security checks helped to patrol the Republican National Convention.
General Robotics' Ferret is a four-inch-high, 14-inch-diameter, disk-shaped robot camera used for inspecting under vehicles. Constructed of anodized aluminum with a high-impact polycarbonate cover, the radio-controlled robot transmits real-time color, wide-angle video images via UHF wireless to an operator up to 100 meters away.
The radio-controlled, Roomba-shaped Ferret under-vehicle inspection robot can transmit real-time video images to an operator up to 300 meters away. (Source: General Robotics)
Operators view the pictures with high-resolution 640 x 480 video glasses, or optional video monitors. The video signal can also be recorded or streamed to a remote location. An extended range option provides a long-range antenna for operation up to 300 meters between the operator and the robot.
The Ferret's movable camera can be tilted to many different angles. Camera angle and the amount of light from its onboard LEDs can both be controlled remotely. Previous methods of searching for bombs and explosives, such as driving a vehicle over a fixed digital scanning ramp, provide only flat images. In contrast, the Ferret is especially useful for seeing up and around drive shafts and into deep wheel wells. (Watch a video demonstrating the robot below.)
At the Republican National Convention, the robot was reportedly used by the Tampa Bay Regional EOD (Explosive Ordnance Disposal) response team and the Secret Service. It has also been field tested by the New York Police Department's bomb squad for first-look applications.
The robot's manufacturer, General Robotics, is a subsidiary of Panoscan, inventor of the MK-3 high-resolution, rotating, 360-degree digital panoramic camera used by the New York Police Department for capturing crime scene data.
The robot, the video belt pack receiver, and the video glasses are all powered by rechargeable batteries. Typical battery run times per charge are about three hours for the Ferret, six hours for the video receiver, and about five hours for the video glasses. The Ferret weighs 8.8 pounds with battery installed and has a one-inch ground clearance. The robot operates on most paved surfaces. Its maximum speed is 3 mph. Its three wheels include one swivel caster and two wheels driven by a direct precision planetary drive.
It looks a lot like an iRobot in terms of its aesthetic design. Not only are these robots perfect for scouting under cars and through parking lots, but what about malls, schools, or other public venues where there are long stretches of terrain to patrol.
I was impressed at what the digital CMOS sensor-based camera made by the parent company can do: it's got a 360-degree panoramic view. But that's not used in the Ferret--that one is a CCD sensor-based camera with (apparently) a 90-degree angle, which is still pretty wide.
Chuck, iRobot makes the Roomba for vacuuming, with a very similar shape, hence my reference. There are various small robots that do surveillance, but I don't recall any of them shaped like the Roomba or the Ferret. Let us know if you find one.
Hi Ann, In addition to vehicle security surveillance, I see this robot being useful for mobile auto mechanics who need to check the underbody of an automobile for leaks, or holes caused by rust in mufflers. What a great tool as well as article! Speaking of iRobot, here's the link to their Creater robot kit for any interested in tinkering with mobile robots. http://store.irobot.com/family/index.jsp?categoryId=2591511&s=A-ProductAge
mrdon, that sounds like a really good app for this robot. But I wonder how much it costs. Some quick Googling didn't turn up any prices for the Ferret, but the much more capable 360-degree Panoscan cameras made by General Robotics' parent company go for about $40,000 each.
Engineers at Fuel Cell Energy have found a way to take advantage of a side reaction, unique to their carbonate fuel cell that has nothing to do with energy production, as a potential, cost-effective solution to capturing carbon from fossil fuel power plants.
This is part one of an article discussing the University of Washington’s nationally ranked FSAE electric car (eCar) and combustible car (cCar). Stay tuned for part two, tomorrow, which will discuss the four unique PCBs used in both the eCar and cCars.
Researchers working with additive manufacturing have said multimaterial techniques will allow industry “to fabricate materials with combinations of density, strength, and thermal expansion that do not exist [yet].”
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.