We've reported on Roomba-like robots that mow your lawn. Now, one with a wide-angle camera for conducting under-vehicle security checks helped to patrol the Republican National Convention.
General Robotics' Ferret is a four-inch-high, 14-inch-diameter, disk-shaped robot camera used for inspecting under vehicles. Constructed of anodized aluminum with a high-impact polycarbonate cover, the radio-controlled robot transmits real-time color, wide-angle video images via UHF wireless to an operator up to 100 meters away.
The radio-controlled, Roomba-shaped Ferret under-vehicle inspection robot can transmit real-time video images to an operator up to 300 meters away. (Source: General Robotics)
Operators view the pictures with high-resolution 640 x 480 video glasses, or optional video monitors. The video signal can also be recorded or streamed to a remote location. An extended range option provides a long-range antenna for operation up to 300 meters between the operator and the robot.
The Ferret's movable camera can be tilted to many different angles. Camera angle and the amount of light from its onboard LEDs can both be controlled remotely. Previous methods of searching for bombs and explosives, such as driving a vehicle over a fixed digital scanning ramp, provide only flat images. In contrast, the Ferret is especially useful for seeing up and around drive shafts and into deep wheel wells. (Watch a video demonstrating the robot below.)
At the Republican National Convention, the robot was reportedly used by the Tampa Bay Regional EOD (Explosive Ordnance Disposal) response team and the Secret Service. It has also been field tested by the New York Police Department's bomb squad for first-look applications.
The robot's manufacturer, General Robotics, is a subsidiary of Panoscan, inventor of the MK-3 high-resolution, rotating, 360-degree digital panoramic camera used by the New York Police Department for capturing crime scene data.
The robot, the video belt pack receiver, and the video glasses are all powered by rechargeable batteries. Typical battery run times per charge are about three hours for the Ferret, six hours for the video receiver, and about five hours for the video glasses. The Ferret weighs 8.8 pounds with battery installed and has a one-inch ground clearance. The robot operates on most paved surfaces. Its maximum speed is 3 mph. Its three wheels include one swivel caster and two wheels driven by a direct precision planetary drive.
Very cool. Should be a staple for airport security, patrolling parking lots and other public venues if it really is effective. That would definitely ensure a higher level of safety.
It looks a lot like an iRobot in terms of its aesthetic design. Not only are these robots perfect for scouting under cars and through parking lots, but what about malls, schools, or other public venues where there are long stretches of terrain to patrol.
Great idea! The new airport skirt cam! Fun for parties too. They're expected to be on the wish list of every college dorm security guard. Get your orders in early.
I was impressed at what the digital CMOS sensor-based camera made by the parent company can do: it's got a 360-degree panoramic view. But that's not used in the Ferret--that one is a CCD sensor-based camera with (apparently) a 90-degree angle, which is still pretty wide.
Chuck, iRobot makes the Roomba for vacuuming, with a very similar shape, hence my reference. There are various small robots that do surveillance, but I don't recall any of them shaped like the Roomba or the Ferret. Let us know if you find one.
Hi Ann, In addition to vehicle security surveillance, I see this robot being useful for mobile auto mechanics who need to check the underbody of an automobile for leaks, or holes caused by rust in mufflers. What a great tool as well as article! Speaking of iRobot, here's the link to their Creater robot kit for any interested in tinkering with mobile robots. http://store.irobot.com/family/index.jsp?categoryId=2591511&s=A-ProductAge
mrdon, that sounds like a really good app for this robot. But I wonder how much it costs. Some quick Googling didn't turn up any prices for the Ferret, but the much more capable 360-degree Panoscan cameras made by General Robotics' parent company go for about $40,000 each.
$40,000! Wow, Ann. That's a lot if it's like the Ferret. The Ferret looks fairly simple, technolgy wise. Can't imagine the parts that go into it cost more than a few hundred dollars.
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Two new introductions in the world of motion drives for automation are moving toward use of standard Ethernet communications, eliminating the use of custom hardware.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
3 
