Low-cost silicone robots that walk, change color to match their surroundings, and light up in the dark may soon be added to the array of robots (discussed here and elsewhere) that are helping first responders and the military.
The soft, vaguely starfish-shaped robot is equipped with microfluidic channels. The networks of these channels are contained in thin silicone sheets, called color layers. Air and other fluids (such as water, heated or cooled dye, and fluorescent or chemiluminescent solutions) are pumped through the color layers. Depending on the combination, they can change the robot's surface temperature, color, luminescence, and shape, letting it blend with its environment. Alternatively, the robot can glow with the help of chemiluminescence or fluorescent fluids.
Low-cost silicone robots can walk, change color to match their surroundings, and light up in the dark, promising help for first responders and the military. (Source: DARPA)
The robot's movement is controlled by pneumatically pressurizing and inflating the channels. When filled with fluid, it moves at approximately 40 meters per hour. Without the fluid, the speed rises to about 67 meters per hour. Though future research will focus on smoothing its movements to improve the speed, the researchers say the robot's flexibility is more important.
DARPA is interested in soft robots because they are flexible and resilient and can change their shape to maneuver through tight spaces. In the video below, the researchers demonstrate the robot's abilities using tethers that are attached to the control system and pump pressurized gases and liquids into the robot.
Though future versions may incorporate power sources and pumps in the robot itself, operating it with tethers reduces its size and weight. The current rate of pumping (2.25ml per minute), produces a color change in the robot after 30 seconds. After the color layers are filled, they can sustain their color without additional power.
The shapes are made with molds produced with a 3D printer and cost less than $100 each. To date, developing robotics technologies that can be used for Department of Defense applications hasn't been cheap. DARPA says the soft robots' low cost helps overcome one of the major obstacles to DoD adoption of robot technology.
Last year, some of the same researchers developed the first soft silicone robots, modeling them after cephalopods such as squid, which produce instantly changeable camouflage patterns and communicate with colored inks and bioluminescence. In search-and-rescue operations, the new robot could fluoresce to stand out in a dark corridor and guide first responders to injured people.
The robot may also have medical applications. They could be incorporated into prosthetics technology, for example, and the ability to simulate blood vessels and muscle motion may help doctors plan surgeries.
I agree, Chuck. It would help to see what they mean about tight spaces. My guess is that since it's squishy, it can fit into places that a "hard" robot would not be able to fit through. However, it's still tethered, so that could be a hindrance to maneuverability.
Thanks Nadine, glad you enjoyed the post. Even though, as Lou noted it's not a great video and the movements of the robot are rather crude, it's still fun to watch. I thought the prosthetics apps seemed a bit far-fetched, but the search-and-rescue ones make sense for navigating tight spaces and acting as a type of sentinel by lighting up. What I'd like to see is the untethered stage of this beastie.
Lou, much of this robotics research, like other research, doesn't get all the way to a full-blown product/system. That's because some of it consists of fundamental investigations of how things work, and some of it just doesn't pan out. In general, that's pretty typical of advances in both the sciences and technology. As many commenters have noted, making people aware of what other engineers are thinking up can be inspiring.
Ann, this is an interesting technology. On the other hand, the video was underwhelming. It is always interesting to hear the speculation that researchers have for their developments. I wonder if anyone really tracks the accuracy of what is said.
We looked at a number of sources to determine this year's greenest cars, from KBB to automotive trade magazines to environmental organizations. These 14 cars emerged as being great at either stretching fuel or reducing carbon footprint.
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is