Medical robots (a frequent topic here) are popping up everywhere, whether they're being used in surgeries, assisting paralyzed people, or monitoring remote patients. The latest one helps cardiologists in a type of surgery called percutaneous coronary intervention (PCI), which uses stents and balloon catheters to restore blood flow to blocked arteries.
The FDA has approved Corindus Vascular Robotics' CorPath 200 for PCI surgery. Like other robotic assistants, the CorPath 200 gives surgeons very precise control over fine-tuned tasks, such as manipulating coronary guidewires and stents. It lets them move surgical devices and tools in increments as small as 1mm in blood vessels only 3mm or 4mm in diameter.
A robotic system helps cardiologists with PCI surgery, a procedure that restores blood flow to blocked arteries. (Source: Corindus Vascular Robotics)
The system also helps interventional cardiologists remain at a safe distance from the radiation produced by the X-ray guidance systems they use to perform these procedures. To protect themselves, cardiologists have worn restrictive lead aprons weighing up to 40 pounds, but the physical stress of wearing them can lead to back pain, fatigue, and orthopedic injuries. It's also not clear from the research that's been done whether this protection is adequate over a career that involves repeated exposures.
The CorPath 200 lets surgeons control placement of coronary guidewires, stents, and balloon catheters from a lead-lined cockpit. The surgeon is seated in front of monitors that show the angiography screen. This setup may reduce physical fatigue and head, neck, and back strain. (Watch a video demonstrating the robot here.)
As the basis for submitting its application to the FDA, Corindus conducted a multi-center study, the CorPath PRECISE Trial. The company says this study resulted in an overall procedure success rate of 97.6 percent. Also, in 98.8 percent of patients, PCI surgery could be completed without converting to manual PCI and without device-related complications. The study also found the system reduced radiation exposure by 95 percent.
Corindus says that it expects to use the system's open platform technology and intellectual property to address other types of vascular surgery, including peripheral, neuro, and structural heart applications.
Cool development, Ann. It does seem like you (and others) have been writing a ton about medical-related robotics technology lately. Have we turned the tide on some particular piece of technology or perhaps a cultural shift that signals this segment is more ready to embrace this kind of technology?
Impressive robot, Ann. Sounds like the robots movements are finer than a surgeon's hands. Is it still the surgeon who manipulates the robot? It would be interesting to see in coming year whether technicians will control medical robots, thus replacing surgeons -- a new version of the machine versus the human body.
Beth, I think the answer is yes. Meaning, a combination of several factors. For one thing, the story I wrote on the open source Raven II surgical robot http://www.designnews.com/document.asp?doc_id=239419 and NASA's use of the daVinci surgical robot http://www.designnews.com/document.asp?doc_id=237609 made it clear that surgical robotics technology is being applied to a variety of applications. Next, the open source Robotic Operating System (ROS), which Raven II is based on, and open source robotics in general, are taking off, broadening the types of surgery robotic assistance is being aimed at. And patients, as well as surgeons, are also becoming more accustomed to the idea and the practice.
Rob, in all so-called surgical robots, it's always the surgeons' hands that manipulate the tools. Technically, it should be called robotic-assisted surgery.
Do you see a time, Ann, when technical people -- who may understand the technology better than a surgeon -- are at the controls of this technology? Or, will we see a form of surgical practice that specializes on the use technology?
I'm not quite sure what you're asking. The robot surgical tools are the same ones surgeons use, but much smaller and more finely tuned, so they are more accurate. They can be smaller partly because the surgeons are controlling them through a robot intermediary. They are also accompanied by video cams that give the surgeons closeups of what they're working on. So they are really extensions of the surgeon.
Ann, Excellent story. It makes sense that robotics would be a great addition for very precise control over fine-tuned tasks that a surgeon must perform. It's also amazing that the interfaces have become so visual. I like to tease a young man I've know for years, who just graduated from medical school, that all his years at video games are coming in handy for his new life as a cardiologist. Thanks.
Once again we see a story about engineers advancing medical science and saving lives. I'm not trying to detract from the important work that physicians and surgeons do, but it would be nice to see engineers get their due (as doctors do) when the subject turns to medicine in popular culture. Great story, Ann. There can never be too many of these!
So right you are. The video gaming generation finally has use for those skills. There is still skill and judgment involved, but I'll bet eventually the engineers will even take that out of the equation. Then it will all be done automatically!
We looked at a number of sources to determine this year's greenest cars, from KBB to automotive trade magazines to environmental organizations. These 14 cars emerged as being great at either stretching fuel or reducing carbon footprint.
Researchers at MIT and Sandia National Labs have observed a reaction in lithium-air batteries that could help improve the design of these cells for electric vehicles and other applications.
Healthcare might seem to be an unlikely target application for the Internet of Things technology, but recent developments show small ways that big-data is going to make an impact on patient care moving into the future.
As energy efficiency becomes more and more a concern for makers of electronics devices, researchers are coming up with new ways to harvest energy from sound vibration, footsteps, and even electromagnetic fields in the air.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
3 
