Like many robots deployed in military applications, robots used for post-disaster search-and-rescue missions will go places humans can't. Most are tasked with gathering and reporting data back to human operators to help them locate victims and avoid dangerous situations. To help human first responders, these robots may be a swarm of small individuals communicating among themselves, such as those built by the Georgia Institute of Technology. Others are larger individual units that look for and help victims, like Survivor Buddy.
The design platforms they're based on often do double duty as surveillance and reconnaissance aides for the military, so they're usually equipped with communications capabilities, cameras, and multiple sensor options. Most of them are remote controlled. Some can be configured for autonomous operation, and others are entirely autonomous.
Click on the photo below for a slideshow of 10 of these heroic robots in action.
A different way of making rescue robots friendlier is designing them to look more like people, and making them big and strong enough to lift and carry unconscious disaster victims for long distances without hurting them. One example is the Battlefield Extraction Assist Robot (BEAR) prototype, built by Vecna Robotics and funded by the US Army Medical Research and Materiel Command's Telemedicine and Advanced Technology Research Center. The BEAR, an all-terrain, search-and-rescue, humanoid robot, can lift and carry up to 500 pounds. It's designed to locate, lift, and rescue people, and it can grasp fragile objects without damaging them. The powerful torso and arms are controlled by hydraulics, and its mobility platform has two independent sets of tracked legs. The robot balances itself on the balls of its ankles, and it can remain upright while balancing on its knees or hips. Aside from search and rescue, it can be used for handling hazardous materials, surveillance and reconnaissance, mine inspection, heavy lifting, and warehouse automation. (Source: US Army)
Beth, I had the same impression about BEAR: haven't I seen this in a movie someplace? I'd bet the Hollywood producers and writers of those movies have done their homework and were inspired at least partly by some of these real robots. The other part I'd guess comes straight from the pages of science fiction novels, graphic novels and comic books.
Most of these search and rescue/first responder robots are designed to get into tight spaces and navigate dangerous territory, while also providing reconnaissance about dangerous conditions and/or locating or helping victims. For example, Survivor Buddy, Gemini-Scout, the aptly named FirstLook, Georgia Tech's tiny MAST robots, Surveyor SRV-1, and Hector GV. The larger DARPA bots are aimed at clearing a path for first responders and/or helping victims. I suspect they'd also be useful for archeological exploration: some of the surveillance-type robots in the nautical robots slideshow
Most of the robots featured are suited for surveillance, which can lead to rescue, but don't address the most hazardous issues in search and rescue. Getting through tight spots or in collapsed buildings prevent human rescuers from reaching victims quickly.
I'd love to see if the robots featured here can help archeologists.
Bear is really cool and could do wonders for saving lives. That robot and some of the others look like they are straight from a Hollywood action flick. I think with the robots that actually interact with victims, incorporating as much humanoid technology as possible is probably a plus.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New disc magnet motors fit into the design trend of stepping up to closed loop performance while maintaining the cost advantage of stepper motor technology.
At the Design News webinar on June 27, learn all about aluminum extrusion: designing the right shape so it costs the least, is simplest to manufacture, and best fits the application's structural requirements.
A new battery design, which replaces lithium with abundant and low-cost elemental sulfur, is still in its nascent stages but shows real promise for giving batteries more energy potential.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
