Like many robots deployed in military applications, robots used for post-disaster search-and-rescue missions will go places humans can't. Most are tasked with gathering and reporting data back to human operators to help them locate victims and avoid dangerous situations. To help human first responders, these robots may be a swarm of small individuals communicating among themselves, such as those built by the Georgia Institute of Technology. Others are larger individual units that look for and help victims, like Survivor Buddy.
The design platforms they're based on often do double duty as surveillance and reconnaissance aides for the military, so they're usually equipped with communications capabilities, cameras, and multiple sensor options. Most of them are remote controlled. Some can be configured for autonomous operation, and others are entirely autonomous.
Click on the photo below for a slideshow of 10 of these heroic robots in action.
A different way of making rescue robots friendlier is designing them to look more like people, and making them big and strong enough to lift and carry unconscious disaster victims for long distances without hurting them. One example is the Battlefield Extraction Assist Robot (BEAR) prototype, built by Vecna Robotics and funded by the US Army Medical Research and Materiel Command's Telemedicine and Advanced Technology Research Center. The BEAR, an all-terrain, search-and-rescue, humanoid robot, can lift and carry up to 500 pounds. It's designed to locate, lift, and rescue people, and it can grasp fragile objects without damaging them. The powerful torso and arms are controlled by hydraulics, and its mobility platform has two independent sets of tracked legs. The robot balances itself on the balls of its ankles, and it can remain upright while balancing on its knees or hips. Aside from search and rescue, it can be used for handling hazardous materials, surveillance and reconnaissance, mine inspection, heavy lifting, and warehouse automation. (Source: US Army)
BEAR reminds me of Robo-Cop. It is a great idea to use the robots to interact with victims. If the robots had audio capabilities this would/could allow two communications with victims. In the case of a rescuing a child it would be comforting for a child to hear someone's voice, like their parent to keep them claim.
Thanks, William, I must have missed that one. I agree, speech and sound technology is at a point where it can enhance robot communication, especially at post-disaster stressful times for humans.
Ann, it was in the post by ervin0072002 , who suggested some "sedative gas" or somesuch. The nearby comments mentioned the potential for legal grief if the robot did not deliver up to somebody's expectations.
Where the problem begins is in the minds of those who have no technical understanding at all, and presume that engineers can do anything if they choose to do it, and spend enough money on it. That, along with the inability of so very many to focus their attention long enough to learn and understand things, seems to be the basis of those who are unwilling, or unknowing-enough, so that they believe that all of their existance is "somebody else's" responsibility.
On the other side, rescue robots do need to be made to look and sound friendly and reassuring. That is why the comment about needing a very good quality speech and sound system on the robots. Fortunately that technology is quite mature.
William, I'm not sure where the idea of tranquilizing victims comes from. If you mean the Survivor Buddy, the point there was lessons learned after 9/11 about how weird, alien and upsetting a robot can appear to a human in distress. So the GUI and the machine's body language were designed to help calm the victim, as well as provide web communication with family and rescuers. Or did you mean something else?
One of the many advantages of humans (organics) is our mass to strength ratio. We efficiently convert food to energy and productivity. We have a built-in computer that has millions of parallel processors and almost unlimited memory, plus billions of input devices of various types (sound, touch, smell, optical, temperature, psychic (??), etc. No machine has all these capabilities in such a neat little package (well, "little" is in the eyes of the beholder). As we develop our little robot companions, the mass (weight, here on earth) adds up quickly and soon becomes unwieldy. Too bad, but it is a fact of life. We haven't been able to improve on God, and probably won't come close, but we can develop specific-use robots to help us in our travail through life. Rescue robots are top on my list! Too bad we have to replace so many workers with assembly line robots, but that is an economic fact of life. It will be interesting to see how our best and brightest come up with new solutions over the next few years in robotics. I will certainly be following the engineering side of this work. I hope it acts as a spring board to other areas like NASA did.
Warren, I'd guess that since most of the rescue robots are being designed for deployment by the military and first responders like police departments, they aren't likely to be deployed by civilians in a disaster. OTOH, if you buy one for help in the kitchen, you're probably on your own.
I am sure that I have seen the "BEAR" robot quite a while back, probably in Design News, and it would seem that whatever needed to be verified would be verified by now. As for a battlfield rescue robot, An American flag on the robot's chest would be enough for many, although certainly a robot could deliver a voice message as well. The very best choice would be to provide a bit of training for those likely to be rescued.
Of course, in a disaster or fire rescue a robot could certainly have a friendly human sounding voice, since it would not need much in the line of life support hardware for itself.
The concept of tranquilizing a panicy victim is about the most poorly advised idea that I have ever heard, since the legal ramifications would be horrible. We all know that.
I think we're going to see applications for robots increase. Drones are a form of robot. Robots were used to defuse the apartment of accused Aurora shooter James Holmes.
I like the idea of robots coming to the rescue, unlike the abominable movie "I Robot", but I fear for the poor soul who sells one and gets sued as soon as it doesn't live up to human expectations. The technology is there and being used piecemeal now, but when the lawyers get hold of it, it would be better to just let the poor fool die.
Having made my disclaimer, it is time we used some of our robot playthings in universities to help mankind in more ways. We already use them, I hear, to clear roadside bombs, old land mines, nuclear (nuclur, dear George) waste,etc., but if they could come to the rescue in house or building fires, chemical spills, and so on, a lot of lives could be saved. Maybe even mine when I mess up in the kitchen...
Funny you should say that, Jack. The first time I saw the Army's BEAR robot, I thought it looked like a teddy bear, not a real bear. Come to think of it, maybe that's on purpose, to make it look friendlier.
We looked at a number of sources to determine this year's greenest cars, from KBB to automotive trade magazines to environmental organizations. These 14 cars emerged as being great at either stretching fuel or reducing carbon footprint.
Researchers at MIT and Sandia National Labs have observed a reaction in lithium-air batteries that could help improve the design of these cells for electric vehicles and other applications.
Healthcare might seem to be an unlikely target application for the Internet of Things technology, but recent developments show small ways that big-data is going to make an impact on patient care moving into the future.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
1 
