Festo's AquaPenguin is one of many projects the company has pursued under its Bionic Learning Network. The network's purpose is to use the energy-efficient principles already found in nature and adapt them to automation technology. The AquaPenguin is an autonomous underwater vehicle with penguin-inspired hydrodynamic body contours. Equipped with a 3D sonar system, like that of dolphins, it can communicate with its surroundings and other AquaPenguins, independently orient itself, and navigate. Its torso, head, and tail sections can move in all directions for maneuvering in cramped areas, letting it turn on a dime and swim backwards. (Source: Festo)
Island_Al, I would guess the humanoid firefighter is already carrying a weapon. It was probably designed to carry a weapon. The firehose was likely an afterthought.
According to that press release, the Wave Gliders will be aimed at lowering the cost and risks of seismic, subsea and environmental monitoring, tasks it's already done in those and other situations.
I agree, Gsmith120. Lately there seems to be a renaissance in robotics development. Most of the big leaps seem to be coming from the military. That's not surprising given the military budget.
Beth. when I looked at the details--as much as Festo will give--of their jellyfish and penguin robots I was stunned at the quality of the design. Perhaps I shouldn't have been: Festo is known for quality and clearly good design is required for underwater robots, especially autonomous ones. Their utility, at least for surveillance-type apps, seems pretty clear.
Chuck, I agree--they look so vulnerable, yet are surprisingly rugged. In fact, Liquid Robotics has just formed a separate joint venture company with Schlumberger for oil & gas exploration and production services: http://liquidr.com/files/2012/06/Schlumberger_LiquidRobotics_Joint_Venture.pdf
Ann, it would be wonderful to see the military engage in formal tech transfer programs like the national labs do. The labs have programs to send their R&D out to start-ups -- usually start-ups runs by former lab researchers. It's a great idea to make the taxpayer-financed research available to entrepreneurs. Robotics looks like a perfect candidate for tech transfer.
Further down the scale are the awimming pool cleaning robots which sweep and vacuum the bottom of your swimming pool (if you're lucky enough to have one...). Designing a robot that can work underwater is not trivial - getting rid of excess heat is a problem, you can't expose a heatsink to the water because it will suffer galvanic corrosion. Keeping water out is another problem, when you have moving or rotating parts passing through a watertight enclosure.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New disc magnet motors fit into the design trend of stepping up to closed loop performance while maintaining the cost advantage of stepper motor technology.
At the Design News webinar on June 27, learn all about aluminum extrusion: designing the right shape so it costs the least, is simplest to manufacture, and best fits the application's structural requirements.
A new battery design, which replaces lithium with abundant and low-cost elemental sulfur, is still in its nascent stages but shows real promise for giving batteries more energy potential.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
2 
