For those attempting to regain control over their own hardware, Weins said, the solution is to get rid of Apple’s “pesky screws” and replace them with the regular Phillips screws used in previous iPhone models.
iFixit is even offering an iPhone 4 Liberation Kit, which it’s selling for less than $10. It includes an improvised Pentalobe driver, two replacement Phillips screws, and a regular #00 Phillips screwdriver.
This could be viewed two ways. On the one hand, it might be beneficial, as it would create a deterrent for 'Alphabet Agencies' and others to tamper with. On the other, it limits home users from modifying their own property or repairing it on their own.
HARPO-54: This is exactly what I have done. I replaced my "aging" mobile phone some months ago and of course had a multitude of brand names from which to choose. I did go Android. My oldest granddaughter had an Apple laptop some years ago, purchased prior to her freshman year at the university. There is only ONE authorized repair depot for Apple products in our city-- they know that consequently charging outrageous prices for their work and parts. That was my lesson learned. The cost for repairs to her"machine" was approximately one-half the purchase price. Last year the laptop died. This time, we go PC version and she made that decision.
No Rob, the air in the fridge is a very dry. This is because much of the moisture condenses on the evaporator, then the air warms up as it circulates, hence RH drops. Ambent humidity here at the moment is 99%, RH in fridge 32%.
It is ideal for drying stuff.
Presuming distilled water has displaced whatever H2O was in the phone, (esp if salt water) then no residue will remain - odds fairly good phone will function. I tried this with a Moto abt 15 years ago, (dunked in fresh water) & phone came back. Only damage was from a rinse in metho which damaged the screen.
Most important thing though is to get battery out ASAP. Which is where Apple is the problem, for iPhone users, with those Torx.
Not too long ago, I was replacing my car's headlight gear motors and found that a Phillips bit with 3/8 drive would be perfect to have. I simply drove to my neiborhood auto parts store and bought a set. I would never buy a car that used mounting/fastening hardware that was not readily available. Likewise, I will not buy any Apple products that incorporate tactics such as the one mentioned.
The company says it anticipates high-definition video for home security and other uses will be the next mature technology integrated into the IoT domain, hence the introduction of its MatrixCam devkit.
Siemens and Georgia Institute of Technology are partnering to address limitations in the current additive manufacturing design-to-production chain in an applied research project as part of the federally backed America Makes program.
Independent science safety company Underwriters Laboratories is providing new guidance for manufacturers about how to follow the latest IEC standards for implementing safety features in programmable logic controllers.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.