HARPO-54: This is exactly what I have done. I replaced my "aging" mobile phone some months ago and of course had a multitude of brand names from which to choose. I did go Android. My oldest granddaughter had an Apple laptop some years ago, purchased prior to her freshman year at the university. There is only ONE authorized repair depot for Apple products in our city-- they know that consequently charging outrageous prices for their work and parts. That was my lesson learned. The cost for repairs to her"machine" was approximately one-half the purchase price. Last year the laptop died. This time, we go PC version and she made that decision.
That makes perfect sense, Stuart21. My daughter's iPod went through the wash. After it came out, she put it in the freezer. After a day in the freezer, it worked. Same principle?
No Rob, the air in the fridge is a very dry. This is because much of the moisture condenses on the evaporator, then the air warms up as it circulates, hence RH drops. Ambent humidity here at the moment is 99%, RH in fridge 32%.
It is ideal for drying stuff.
Presuming distilled water has displaced whatever H2O was in the phone, (esp if salt water) then no residue will remain - odds fairly good phone will function. I tried this with a Moto abt 15 years ago, (dunked in fresh water) & phone came back. Only damage was from a rinse in metho which damaged the screen.
Most important thing though is to get battery out ASAP. Which is where Apple is the problem, for iPhone users, with those Torx.
Not too long ago, I was replacing my car's headlight gear motors and found that a Phillips bit with 3/8 drive would be perfect to have. I simply drove to my neiborhood auto parts store and bought a set. I would never buy a car that used mounting/fastening hardware that was not readily available. Likewise, I will not buy any Apple products that incorporate tactics such as the one mentioned.
Rinse in distilled water first - shake dry - full length arm swing centrifuge. Then put in fridge. Freezer may be dangerous if significant water remains.
Get the right drivers! It's that simple! The fact is that a company will do what it wants to do for its reasons. One of those reasons may be to use nonstandard hardware to keep unqualified people from working on their product even when the it's been purchased and owned by the consumer. So, you know what? A qualified person will get the proper driver!
As a person who works on stuff all the time, I get the correct tools for the job as determined by whatever the manufacturer used.
What santimonious drivel. Simple answers are often best, don't buy CRapple stuff, don't hire people like you.
The attitude is what gets me.
Apple knows what is best for you. They may sell you stuff, but you are not REALLY capable of knowing what software you want, music you might want, or certainly repairing anything. The blatent attempts to patent the obvious, and even things first described by others. Apple knows all and owns all! (except for the parts known and owned by Disney of course)
Then there are those like you who encourage and justify such behavior. Really, what does programming proprietary chips have to do with any of this? People repair things with proprietary parts all the time. Sometimes with new third party parts and sometimes with salvage parts for dead devices. (ever seen a perfectly good phone with a broken display?)
"get the right drivers" ! Did you READ the article? Isn't the use of non-standard screws that drivers were not available for one of the points of the article? Didn't another poster mention their belief that now that the tool IS available CRapple would change to something else?
A new battery design, which replaces lithium with abundant and low-cost elemental sulfur, is still in its nascent stages but shows real promise for giving batteries more energy potential.
The push to achieving more intelligent, integrated manufacturing is putting a strong focus on networking and connectivity as key enabling technologies.
Now that solar and wind harvesting technologies are a thriving market, researchers are seeking other environmentally related energy sources for which they can create harvesting devices.
Surveillance, reconnaissance, and search and rescue in military and first responder situations are popular applications for aerial robots. Yet not all the robots are considered unmanned aerial vehicles.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
7 
