Measuring approximately 8" x 6" x 1", Autonet Mobile's in-car Internet router, introduced in 2008, is similar to the size of a home router. With the device, Autonet said, "the kids can be in the back seat, doing online gaming or going to Facebook. All the stuff they can do normally, they can now do in the car." (Photo courtesy of Autonet Mobile.)
Cars do indeed have to many processors and controllers. Multicore will certainly not improve things or reduce the number of them, it will only serve to increase both complexity and price, particularly price to repair them. Likewise, reliability will dive as more functions get mired in poorly written code.
Remember a few years back, when the car was going to have one giant control module and everything was going to be multiplexed, and the car would only have 3 wires? Now, primarily in the search for "product differentiation", every chunk of hardware that does anything spots it's own microcontroller. Worse, each of these little gimmics is vying for a bit of driver attention. The next goal is full internet connectivity and content, with location prompted advertising. Full time distraction coming to a vehicle, even dispite driving being a full time task.
The problem with all of the automation is that it is not able to deal with the exception correctly, every time, always. Drivers often can respond correctly, if they are not distracted, and if they are allowed to respond correctly. BUt the programmed systems can never be right all the time, because they can't ever be programmed that way.
The solution is not better programming, it is getting rid of much of the automation and allowing the driver to be in control. The system can record just what the driver did, so as to either clear him or to nail him. Of course this reduces privacy, but on the roads we could use some accountability, not privacy.
>Slewing bearing called slewing ring bearings, is a comprehensive load to bear a large bearing, can bear large axial, radial load and overturning moment. http://www.1stbearing.com
The other concern is that any problem will always be "the computer". It's been my experience (not in the auto industry) that when anything goes wrong, its the part that people don't understand that is blamed.
I agree with Toolmaker. The best inventions for the internal combustion engine have been electronic fuel injection and electronic ignition. I dont need heated side view mirrors or wipers on my headlights...
I have to confess though, heated seats are nice in the cold weather...
I do not need of this stuff to enjoy an automobile. I certainly do not relish the thought of paying to repair/replace these devices when they fail. I really do use my vehicle to commute and take occasional family trips. I used to even tune them up when it was possible to get at things. I long for the days when mechanics could actually find out what was wrong without needing a computer code to tell them. I had numerous anxious moments when my truck just stopped running, and no mechanic I went to could tell me why. "There is no code in the computer so there is no record of problems." Well yeah there is. Triple A has a record of my being towed here.
It turns out the alternator was spiking which would trigger something to kill the motor to prevent damage. Then it may or may not start right up and we could continue on our way. I stumbled across the problem because I happened to be looking at the dash and saw the amp needle leap all the way to the right just before the motor died.
Do not misunderstand, today's vehicles are far superior to any cars from my youth, but there are times I think the electronic technology has worked against rather than for the end user.
I have two concerns about the all the new fangled electronics and controls. First, drivers will start depending more and more on their cars to automatically correct for their poor driving habits. Driving habits will deteriorate rapidly. Second, when cars unexpectedly take over control from the driver and and an 'accident' results, the lawyers will have a field day.
I agree with you (partially). It is true that today cars have too much electronics, just like phones. I have an Android, but in usage I'm phone 101 and still did not pass the midterm test.
In cars it is a bit different. Most of these things are to support your driving, not to use them 100%.
It is true that some items are not needed, but the car guys like to be different from each other.
I remember as a kid sitting and watching Knight Rider and being fascinated at the ability of KITT to talk and park on its own. Now these items come standard on higher end vehicles. It is amazing on how far autos have come in just the last 20 years.
Still no standard Turbo Boost, but it may be on its way.
The tier-one suppliers and automakers agree with both of you. They know that today's vehicle have too many MCUs, and they know that the wiring rises to an almost unmanagable level as cars start to employ 70 or 80 MCUs. Today's vehicles typically have between 45 and 70 pounds of wiring in them. One solution to the problem is to use more multicore processors, which reduces the number of chips, and therefore reduces wiring, too. Another is to use domain architectures, in which a few powerful processors pick up a lot of the computing chores. The problem is, all this stuff is going to get worse as more vehicles use hybrid and electric powertrains. So there's a big challenge ahead.
New disc magnet motors fit into the design trend of stepping up to closed loop performance while maintaining the cost advantage of stepper motor technology.
At the Design News webinar on June 27, learn all about aluminum extrusion: designing the right shape so it costs the least, is simplest to manufacture, and best fits the application's structural requirements.
A new battery design, which replaces lithium with abundant and low-cost elemental sulfur, is still in its nascent stages but shows real promise for giving batteries more energy potential.
The push to achieving more intelligent, integrated manufacturing is putting a strong focus on networking and connectivity as key enabling technologies.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
