A low-cost technology introduced by the Electric Power Research Institute (EPRI) has substantially increased the output of an Australian combustion-turbine power plant. Using the EPRI technology, air passing through compressors at the Ecogen Jeeralong Power Station in Victoria is sprayed with a fine mist of demineralized water. This cools the inlet temperatures, increasing flow through the combustion turbine. In all, 2,500 fine nozzle sprays per unit are fitted to the turbine inlet air duct. The result: a 10% increase in power output during peak summer demand. Moreover, on hot, dry summer days, when industries and households switch on their air conditioners, the station can be brought to its peak load capacity of 465 MW within a half hour. In another installation in Missouri, the Utilicorp Energy Group estimates a similar system will save the utility more than $3 million through the year 2010. "With EPRI's aid, we identified ways of raising our plant capacity at a fraction of the cost of building a new plant or buying expensive power," notes Mike Jonagon, superintendent of gas turbines at Utilicorp. E-mail email@example.com.
Are they robots or androids? We're not exactly sure. Each talking, gesturing Geminoid looks exactly like a real individual, starting with their creator, professor Hiroshi Ishiguro of Osaka University in Japan.
Truchard will be presented the award at the 2014 Golden Mousetrap Awards ceremony during the co-located events Pacific Design & Manufacturing, MD&M West, WestPack, PLASTEC West, Electronics West, ATX West, and AeroCon.
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This discussion will examine what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.