Agripper system for automatically handling tiny components, developed in the context of a Eureka project, uses the adhesive properties of ice to pick them up. The gripper first sprays a drop of water onto the object to be handled. It then closes in on the object. As soon as they touch, it freezes the water. The component can then be picked up and manipulated as necessary using the gripping strength of ice. This is around 1N/sq mm which is 20-100 times stronger than that obtained with vacuum grippers, says Mario El-Khoury, manager, industrial control at CSEM, the Swiss Centre for Electronics and Microtechnology, a partner in the European project. To release the object, the tip of the gripper is simply warmed up to the phase- change temperature of the liquid interface. The prototype version of Microgrip is capable of handling components measuring between 0.1 and 5 mm, with an accuracy of 1 micron, at a rate of 1,000 cycles per hour. The "ice" gripper is now undergoing industrialization by AP Technologies and Sysmelec, two other participants in the project. Meanwhile, El-Khoury's group is developing applications for the "ice" technology. A new Eureka project, in which Siemens and Philips are participants, will use Microgrip to manipulate micro-sized parts during low-distortion welding operations. For more information, call: Dr. Mario El-Khoury, at: +41-32- 720-55-96.
When you think of the DARPA Robotics Challenge, you may imagine complex humanoid contraptions made of metal and wires that move like a Terminator Series T-90. But what actually happened at the much-vaunted event was something just a bit different.
Traditional dev kits are based on a manufacturer’s microcontroller, radio module, or sensor device. The idea is to aid the design engineer in developing his or her own IoT prototype as quickly as possible. A not-so-traditional IoT development kit released by Bosch aims to simplify IoT prototyping even further.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.