CoroMill Series claims throughput gains of at least 30%. The secret: Fitting up to 14 different inserts to the same cutter body. The same cutter can provide light cutting power for aluminum to heavy roughing on cast steel.
Changing inserts, doesn't require presetting or running test cuts. Chip thickness generated on all edges is homogeneous. Several insert-clamping advances contribute to cutter versatility, stability and precision:
Inserts mounted in spring-loaded cassettes are clamped firmly in cutter body with a wedge.
Thick carbide shims protect both the cutter and insert for longer tool life. In the event of failure, only the shim, which costs far less than a cutter body, needs replacing.
Recessing the cassette-locking wedge screw into the wedge assists chip clearance, safe clamping and easy maintenance.
Locating pin limits setting ranges to provide maximum security, precision and safety within the total setting range.
Zero degree lead angle side- and face-mill machines slots, squares shoulders, cuts off, faces, backfaces, bores, and even makes holes. Serrations ensure radial and axial accuracy and repeatability of 0.0015 inch.
In support of customer demand and the industry's trend toward smaller, more compact designs, Texas Instruments (TI), Philips Semiconductors, and IDT (Integrated Device Technology Inc.) have agreed to source logic devices with the same functionality and pin-outs in space-saving, low-profile, fine-pitch ball grid array (LFBGA) packaging.
Compared with alternative types of packaging, the 0.8-mm ball pitch LFBGA logic package provides improved electrical and thermal performance. LFBGA reduces inductance by 45% compared to TSSOP packages. Small impedance variations between the package's pins results in a lower skew rate. Tests show the LFBGA package is up to 50% more efficient than TSSOP packages.
Space-constrained devices such as wireless telephone systems, base stations, networking systems, memory modules and hand-held computers are ideal applications for LFBGA logic devices.
TI Europe, SR Communications, attn: Soroya Johnson, Blackhorse Road, London SE8 5JH, UK. Ref event #SLL11001224E.
Because cable integrity on a suspension bridge is vital, it is important to know when strands break and how many are broken. These cable-strand break detectors contain an accelerometer and clip onto the bridge cables at intervals of 5 to 30m, depending on spacing of the roadway hangers.
When a strand breaks, the shock of it snapping produces a longitudinal wave with an amplitude of at least 1g. The first sensor detecting the shock wave signals other detectors along the line, increasing their sensitivity thresholds so that they can also detect the shock wave as it is attenuated along the cable. Analysis of the wave propagation using the signals received by a number of sensors enables localization of the break.
Accelerometer signals are filtered, amplified, and converted to digital signals for analysis. System needs about one month to assess background vibrations due to normal traffic flow before monitoring.
The company says it anticipates high-definition video for home security and other uses will be the next mature technology integrated into the IoT domain, hence the introduction of its MatrixCam devkit.
Siemens and Georgia Institute of Technology are partnering to address limitations in the current additive manufacturing design-to-production chain in an applied research project as part of the federally backed America Makes program.
Independent science safety company Underwriters Laboratories is providing new guidance for manufacturers about how to follow the latest IEC standards for implementing safety features in programmable logic controllers.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.