Trailer rental firms insist that tow vehicles provide operating lights — turn, tail and brake lights for every towed vehicle rented. Easy to do if the tow vehicle is wired that way, but a pain if it has separate turn and stop lamp circuits. John's solution is a pair of diodes, some quick disconnects and an inexpensive wiring harness. He used Schottky diodes for low- voltage drop, rated 3A to handle 36W of trailer lights. He then threw in a few quick splice connects for the rear tail light wires and the mate to the trailer's 4-Way Flat and was set quicker than he could say "You haul!" Oh, yeah — be sure the vehicle and tow hitch can handle the trailer, cargo and tongue weight.
Trailer Lights Hookup Kit Parts List
Allied Part #
3A Schottky diode
Quick splice connector
Additional parts required: Champion Trailer # 4378 car side trunk connector
This Gadget Freak is undergoing an update. Please revisit this link soon for the full instructions.
The series now can interface with a wider array of EtherNet/IP-compliant hardware across many industrial sectors, including factory automation systems, plastic injection molding apparatus, and materials-handling equipment.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.