Looking for cool way of wowing that special someone on Valentines Day/birthday/whatever? Build her a flashing heart made from LEDs driven by a programmable microcontroller. Les' gadget is simple to build and made from easily-obtainable parts. The unique thing about this design is the LEDs are in an X-Y matrix so each LED is addressable. This allows an unlimited combination of displayed patterns for the heart — not like some other designs out there! Source code and schematics are all available here and if you're not into hand wiring, even the PCB can be had for a small fee. Diamonds may be a girl's best friend but gadgets are forever.
Flashing Heart Parts List
Amt
Part Description
Allied Part #
1
9V Power Supply STA-9530A
928-9685
2
Ceramic Cap 27pF
881-5122
3
Ceramic Cap 100nF
507-0218
1
Crystal 12 MHz
895-0687
1
Diode 1N4148
263-1538
1
Eprom (optional) 24C16
652-0019
5
PNP Transistor BC557
431-0475
1
Rectifier 1N4002
266-0002
30
Red LED T-1 3/4
679-9981
1
Regulator 7805
263-0135
5
Resistor 2.2K .25W
832-0405
6
Resistor 120 ohms .25W
895-3139
Additional parts required: Atmel AT89C2051 MCU; Circuit board or perf board
For Les Grant's complete instructions to build your own Flashing Heart, click here.
A new battery design, which replaces lithium with abundant and low-cost elemental sulfur, is still in its nascent stages but shows real promise for giving batteries more energy potential.
The push to achieving more intelligent, integrated manufacturing is putting a strong focus on networking and connectivity as key enabling technologies.
Now that solar and wind harvesting technologies are a thriving market, researchers are seeking other environmentally related energy sources for which they can create harvesting devices.
Surveillance, reconnaissance, and search and rescue in military and first responder situations are popular applications for aerial robots. Yet not all the robots are considered unmanned aerial vehicles.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
7 
