Endevco Corp., San Juan Capistrano, CA, has completed what it claims to be the first available cold-gas shock tube that can effectively analyze the response of a pressure transducer. The device, along with its computerized analysis system, is designed to check the accuracy of pressure transducers used in turbine engines installed in aircraft, electrical power plants, and other industries. Engineering students from Texas Christian University (TCU) developed the shock tube in collaboration with Endevco engineers. The two-semester-long project involved researching shock tubes built and applied to pressure-transducer testing since the 1940s. Research included acquiring data analysis software and hardware to process the pressure-transducer signals resulting from the shock-tube environment. National Instruments' LabVIEW helped generate results used by the TCU team. The 12-ft-long x 3.5-inch-diameter shock tube, using helium as the driver gas, can be pneumatically or hydraulically activated. FAX (714) 661-7231.
The transformative nature of designing and making things was the overarching, common theme at separate conferences held in Boston by two giants in the PLM space: Autodesk, with its Accelerate 2015, and Siemens’s Industry Analyst Conference 2015.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.