MATERIALS: By managing the material speed and direction, MARTIN® Inertial Flow™ Transfer Chutes from Martin Engineering can minimize impact and wear on liners and belts, while containing the dust and spillage that are often generated at transfer points.
The engineered flow chutes employ special geometries that capture and concentrate the material stream as it travels through the chute. Every design is tailored to suit the specific material characteristics and conveyor systems of the individual customer, rather than using stock products and attempting to make them work. Inertial Flow Transfer Chutes from Martin Engineering provide the dual benefits of minimizing aeration and preventing buildup within the chute, particularly important when dealing with combustible materials.
MARTIN Inertial Flow Transfer Chutes also incorporate replaceable liners, allowing operators to unbolt the enclosure for simplified replacement of worn components without confined space entry.
Engineered chutes typically employ a “hood and spoon” transfer, with the hood discharge chute at the top of the system and a spoon receiving chute to place material onto the belt being loaded.
The goal is to confine the material stream and reduce air entrainment, while directing the moving material onto the receiving belt with minimal impact. Successful designs reduce spillage, abrasion, dust and premature wear. This control also helps ensure that material is center-loaded on the belt, avoiding mistracking and fugitive material.
To achieve the optimum hood, spoon and settling area, engineered flow chutes from Martin Engineering are designed using 3-D computer-based flow and modeling to define the geometry.
Designers use detailed information about the specific material characteristics and the parameters of the conveyor system itself, including the feed system, belt properties, support structure and transfer distances. Martin Engineering also has in-house capability to perform comprehensive bulk material testing to obtain critical friction values, using customer-specific materials, belt construction and liner materials.
By controlling the velocity and force of impact in the load zone to match the belt speed and direction, the engineered systems mitigate material splash, turbulence and dust. The low-turbulence, low-impact loading and controlled airflow can eliminate the need for baghouse dust collection systems, and the stable material path contributes to improved transfer, while minimizing belt abrasion and spillage.
-Edited by Kelsey Anderson