MOTION CONTROL: For automated industrial inspection machines and vision systems, Baumer has introduced the GigE Trigger device designed to control single-camera or multi-camera setups, eliminating the need for hardware triggers and greatly simplifying cable requirements. Featuring multiple input/output ports, these devices can eliminate the need for PLC controllers by combining sensor information with machine vision applicationsWith eight inputs and eight outputs, the GigE Trigger device provides many connections for integrating light barriers, encoders, sensors and actuators and eliminates the need for a digital I/O card located in a PC. The GigE Trigger device itself evaluates input signals and provides real-time control of additional process steps. To trigger GigE cameras directly, these devices are equipped with a three-port switch—one port controls the internal trigger signals, the second port is connected to the camera, and the third port transfers the images to the PC. In combination with a GigE switch, the GigE Trigger device can be used to control multiple cameras and supports all Baumer standard GigE cameras or PoE cameras.
On Memorial Day, Americans remember the sacrifices the US armed forces have made, and continue to make, in service to the country. All of us should also consider the developments in technological capabilities and equipment over the years that contribute to the success of our military operations.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.