ELECTRONICS: Linear Technology Corporation introduces the LTC4425, the latest in a family of 2-cell supercapacitor chargers for addressing high peak power, data backup and “dying gasp” needs in portable and data storage applications. The device employs a linear CC-CV architecture with thermal limiting to charge two supercapacitors in series to a programmable output voltage from a Li-Ion/Polymer battery, a USB port, or other 2.7 to 5.5V current-limited supply.
The LTC4425 features two operating modes: charge current profile (normal) mode and LDO mode. The device’s charge current profile mode charges the top of the supercap stack to the input voltage VIN with a charge current that varies inversely with the input-to-output voltage differential in order to present excessive heating. The LDO mode charges the stack to an externally programmed output voltage with a fixed charge current that is also externally programmable. Charge current is resistor programmable up to 2A (3A peak), and each capacitor is protected against overvoltage by internal shunts (2.45V/2.7V selectable). The LTC4425’s onboard current-limited ideal diode features extremely low 50mΩ on resistance to prevent back-driving of VIN, making it suitable for a wide variety of high peak power battery and USB-powered equipment, industrial PDAs, portable instruments and monitoring equipment, power meters, supercap backup circuits and PC card/USB modems.
The LTC4425’s automatic cell balancing feature maintains equal voltages across both cells, eliminating the need for balancing resistors while protecting each supercapacitor from overvoltage damage while minimizing current drain on the capacitors. The IC operates with a very low 20µA quiescent current when the output voltage is in regulation and draws only 2µA in shutdown from either VIN or VOUT, whichever is higher. The basic charging circuit requires only six external components and is highly compact, offered in a tiny 9mm2 package footprint as well as a leaded package. Other key features include a VIN power fail indicator and continuous monitoring of VIN to VOUT current via the PROG pin. Additional protection features include current and thermal limiting that reduces charge current in cases of excessive temperature.
The LTC4425 is available in two compact, thermally enhanced packages; a 12-lead, low-profile (0.75mm) 3mm x 3mm DFN package and a 12-lead MSOP package. Operation from -40 to 85C operating junction temperature is guaranteed. The LTC4425 is in stock, priced starting at $2.25 each in 1,000-piece quantities.
Truchard will be presented the award at the 2014 Golden Mousetrap Awards ceremony during the co-located events Pacific Design & Manufacturing, MD&M West, WestPack, PLASTEC West, Electronics West, ATX West, and AeroCon.
Robots that walk have come a long way from simple barebones walking machines or pairs of legs without an upper body and head. Much of the research these days focuses on making more humanoid robots. But they are not all created equal.
The IEEE Computer Society has named the top 10 trends for 2014. You can expect the convergence of cloud computing and mobile devices, advances in health care data and devices, as well as privacy issues in social media to make the headlines. And 3D printing came out of nowhere to make a big splash.
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This discussion will examine what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.