ELECTRONICS:Linear Technology Corp.’s LT3686, a 1.2A, 37VIN step-down switching regulator operates within a VIN range of 3.6 to 37V with overvoltage lockout, protecting the regulator and load from transients as high as 55V, making it ideal for load dump and cold-crank conditions commonly found in automotive applications as well as 24V industrial supplies. Its internal 1.85A switch can deliver up to 1.2A of continuous output current at voltages as low as 0.8V. Its low minimum on-time enables it to offer high switching frequencies even with high step-down ratios. For example, with an input as high as 16V, it can deliver a 3.3V output using a 2 MHz switching frequency. The LT3686’s switching frequency is user programmable from 300 kHz to 2.5 MHz, enabling designers to maximize efficiency while avoiding critical noise-sensitive frequency bands. The LT3686 also uses a unique design, which ensures that it maintains constant frequency switching, even in very light load conditions. The device’s 3 x 3mm DFN-10 package and high switching frequency, which keeps the external inductor and capacitors small, provides a compact, thermally efficient footprint.The LT3686 utilizes a high efficiency 1.85A, 680 mV switch with the necessary boost diode, oscillator, control and logic circuitry integrated into a single chip. Its catch diode current sense (DA pin) protects the circuit during input voltage transients even at high switching frequencies. Special design techniques used in the LT3686 enable high efficiency over a wide input voltage range, and the device’s current mode topology enables fast transient response and excellent loop stability. Other features include tracking capability, internal compensation and soft-start capability.
Pricing for the LT3686EDD starts at $2.50 each for 1,000-piece quantities. An industrial grade version, LT3686IDD, is guaranteed to operate from a -40 to 125C operating junction temperature and is priced at $2.78 each. Both versions are available from stock.
When you think of the DARPA Robotics Challenge, you may imagine complex humanoid contraptions made of metal and wires that move like a Terminator Series T-90. But what actually happened at the much-vaunted event was something just a bit different.
Traditional dev kits are based on a manufacturer’s microcontroller, radio module, or sensor device. The idea is to aid the design engineer in developing his or her own IoT prototype as quickly as possible. A not-so-traditional IoT development kit released by Bosch aims to simplify IoT prototyping even further.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.