MATERIALS: Master Bond has introduced a thermal adhesive film called FL901AO. It is formulated to function as the preferential heat-transfer path between heat-generating components and heat sinks or other cooling devices. The 100 percent solid, B-stage adhesive-preform provides a high bond strength, no-mess solution to electronic assembly and other industrial bonding and sealing operations. The FL901AO epoxy preform cures quickly at quite moderate temperatures, e.g. one hour at 250F (125C) or 30-40 min at 300F (150C). Also, squeeze out during bonding is almost non-existent. While FL901AO exhibits a thermal conductivity on a level of 10 BTU•inch/ft²hrF, it is highly electrically insulating, with volume resistivity exceeding 10×1012 ohm-cm. The properties of FL901AO are substantially maintained over a wide temperature range from -100 to 400F and upon prolonged exposure to harsh environmental conditions such as moisture, heat and other chemicals. It also features outstanding resistance to thermal shock, vibration and impact.Master Bond’s FL901AO film preform is available in a range of film thicknesses and can be laser or die cut to the configuration of any part. Master Bond also offers the extra service of applying the preformed epoxy film directly onto parts and then returning them to the end user for assembly.
Engineers at the University of San Diego’s Jacobs School of Engineering have designed biobatteries on commercial tattoo paper, with an anode and cathode screen-printed on and modified to harvest energy from lactate in a person’s sweat.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.