MATERIALS: Master Bond has introduced a thermal adhesive film called FL901AO. It is formulated to function as the preferential heat-transfer path between heat-generating components and heat sinks or other cooling devices. The 100 percent solid, B-stage adhesive-preform provides a high bond strength, no-mess solution to electronic assembly and other industrial bonding and sealing operations. An attractive characteristic of the FL901AO epoxy preform is its ability to cure quickly at quite moderate temperatures, e.g. 1 hour at 250F (125C) or 30-40 minutes at 300F (150C). Also, squeeze out during bonding is almost non-existent. While FL901AO exhibits a thermal conductivity on a level of 10 BTU•in/ft²hrF, it is highly electrically insulating, with volume resistivity exceeding 101012 ohm-cm. The properties of FL901AO are substantially maintained over a wide temperature range from -100 to 400F and upon prolonged exposure to harsh environmental conditions such as moisture, heat and other chemicals. It also features outstanding resistance to thermal shock, vibration and impact.Master Bond’s FL901AO film preform is available in a range of film thicknesses and can be laser or die cut to the configuration of any part. Master Bond also offers the extra service of applying the preformed epoxy film directly onto parts and then returning them to the end user for assembly.
There is currently much discussion around the term "platform," which may be preceded by the adjectives "mobile," "wearable," "medical," "healthcare," etc. However, regardless of the platform being discussed, they usually have one key aspect in common: They tend to be wireless. So, why is this one aspect so fairly universal? The answer is convenience.
Everyone has a MEMS story. For most of us it’s probably the airbag that saved our lives or the life of a loved one. Perhaps it’s the tire pressure sensor that alerted us about deflation before we were stranded alone on a dark muddy road.
Bioimimicry is not merely a helpful design tool -- it also encourages designers to think not only about how to solve design problems by imitating nature, but how to make the products, materials, and systems they design more ecologically sound and nature-friendly.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.